324 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
CLI Command Reference
Commands
provides access control for networked devices via one or more centralized servers.
Similar to RADIUS, this protocol simplifies authentication by making use of a single database
that can be shared by many clients on a large network. is based on the TACACS
protocol (described in RFC1492) but additionally provides for separate authentication,
authorization, and accounting services. The original protocol was UDP based with messages
passed in clear text over the network; uses TCP to ensure reliable delivery and a
shared key configured on the client and daemon server to encrypt all messages.
tacacs-server host
Use the
tacacs-server host
command in Global Configuration mode to configure a
server. This command enters into the configuration mode. The
<ip-
address>
parameter is the IP address of the server. To specify multiple hosts,
multiple
tacacs-server host
commands can be used.
Format
tacacs-server host
<ip-address>
Mode
Global Config
no tacacs-server host
Use the
no tacacs-server host
command to delete the specified hostname or IP address.
The
<ip-address>
parameter is the IP address of the server.
Format
no tacacs-server host
<ip-address>
Mode
Global Config
tacacs-server key
Use the
tacacs-server key
command to set the authentication and encryption key for all
communications between the switch and the daemon. The
<key-
string>
parameter has a range of 0 - 128 characters and specifies the authentication and
encryption key for all TACACS communications between the switch and the
server. This key must match the key used on the daemon.
Format
tacacs-server key
<key-string>
Mode
Global Config
no tacacs-server key
Use the
no tacacs-server key
command to disable the authentication and encryption key
for all communications between the switch and the daemon. The
<key-
string>
parameter has a range of 0 - 128 characters This key must match the key used on the
daemon.
Format
no tacacs-server key
<key-string>
Mode
Global Config
Summary of Contents for DWL-8500AP
