328 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
CLI Command Reference
script validate
This command validates a script file by parsing each line in the script file where
<scriptname>
is the name of the script to validate.The validate option is intended to be used
as a tool for script development. Validation identifies potential problems. It might not identify
all problems with a given script on any given device.
Format
script validate
<scriptname>
Mode
Privileged EXEC
Pre-login Banner and System Prompt Commands
This section describes the commands you use to configure the pre-login banner and the system
prompt. The pre-login banner is the text that displays before you login at the
User:
prompt.
copy (pre-login banner)
The
copy
command includes the option to upload or download the CLI Banner to or from the
switch. You can specify local URLs by using TFTP, Xmodem, Ymodem, or Zmodem.
Default
none
Format
copy
<tftp://<ipaddr>/<filepath>/<filename>>
nvram:clibanner
copy nvram:clibanner
<tftp://<ipaddr>/<filepath>/<filename>>
Mode
Privileged EXEC
set prompt
This command changes the name of the prompt. The length of name may be up to 64
alphanumeric characters.
Format
set prompt
<prompt_string>
Mode
Privileged EXEC
Summary of Contents for DWL-8500AP
