manualshive.com logo in svg

D-Link DWL-8500AP, Command Reference Manual

The D-Link DWL-8500AP is a high-performance wireless access point designed for seamless connectivity. With its advanced specifications, this product provides incredibly fast and reliable internet speeds. For user convenience, a comprehensive manual is available for free download from our website, allowing users to easily set up and maximize the potential of this exceptional device.

Share
Download
background image

6    © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.

CLI Command Reference

spanning-tree mst instance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   46
spanning-tree mst priority . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   46
spanning-tree mst vlan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   47
spanning-tree port mode  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   47
spanning-tree port mode all . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   48
show spanning-tree  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   48
show spanning-tree brief . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   49
show spanning-tree interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   49
show spanning-tree mst port detailed  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   50
show spanning-tree mst port summary  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   51
show spanning-tree mst summary  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   51
show spanning-tree summary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   52
show spanning-tree vlan  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   52

VLAN Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   52

vlan database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   53
network mgmt_vlan  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   53
vlan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   53
vlan acceptframe  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   53
vlan ingressfilter  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   54
vlan makestatic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   54
vlan name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   54
vlan participation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   55
vlan participation all . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   55
vlan port acceptframe all . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   55
vlan port ingressfilter all . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   56
vlan port pvid all . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   56
vlan port tagging all. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   56
vlan protocol group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   57
vlan protocol group add protocol  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   57
vlan protocol group remove . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   57
protocol group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   58
protocol vlan group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   58
protocol vlan group all. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   58
vlan pvid. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   59
vlan tagging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   59
vlan association subnet  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   59
vlan association mac . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   60
show vlan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   60
show vlan brief . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   61
show vlan port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   61
show vlan association subnet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   62
show vlan association mac. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   62

Double VLAN Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   62

dvlan-tunnel ethertype . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   63
mode dot1q-tunnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   63
mode dvlan-tunnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   63

Summary of Contents for DWL-8500AP

























































































































































































































































































































































Reviews:

No comments

Related manuals for DWL-8500AP

CAME FROG PLUS Manual preview
FROG PLUS
Brand: CAME Pages: 2
WAGO 852-112/000-001 Manual preview
852-112/000-001
Brand: WAGO Pages: 30
Tecsis MagSwitch Operating Manual preview
MagSwitch
Brand: Tecsis Pages: 2
Edge-Core AS7326-56X Quick Start Manual preview
AS7326-56X
Brand: Edge-Core Pages: 9
Ableconn USBCHUB4A User Manual preview
USBCHUB4A
Brand: Ableconn Pages: 16
J-Tech Digital JTECH-HD4X48 User Manual preview
JTECH-HD4X48
Brand: J-Tech Digital Pages: 28
Generac Power Systems 004635-3 Owner'S Manual preview
004635-3
Brand: Generac Power Systems Pages: 20
Key Digital KD-MS4x4G-2 Manual preview
KD-MS4x4G-2
Brand: Key Digital Pages: 20
Taiden TMX-0404SDI Installation And Operation Manual preview
TMX-0404SDI
Brand: Taiden Pages: 21
Ubiquiti EdgeSwitch Quick Start Manual preview
EdgeSwitch
Brand: Ubiquiti Pages: 14
IPGARD SDHN-4D-P Quick Start Manual preview
SDHN-4D-P
Brand: IPGARD Pages: 2
Heyer AGS 80 D Instructions For Use Manual preview
AGS 80 D
Brand: Heyer Pages: 29
NETGEAR ProSafe GSM5212P (German) Installationsanleitung preview
ProSafe GSM5212P
Brand: NETGEAR Pages: 2
Omnitron Systems Technology iConverter GX/X User Manual preview
iConverter GX/X
Brand: Omnitron Systems Technology Pages: 2
D+H GE 650 Set Original Instructions Manual preview
GE 650 Set
Brand: D+H Pages: 16
MCOHome MH-S312 User Manual preview
MH-S312
Brand: MCOHome Pages: 3
Lindy 42346 User Manual preview
42346
Brand: Lindy Pages: 16
Blagdon POWERSAFE 2 Manual preview
POWERSAFE 2
Brand: Blagdon Pages: 6

Brands by name

Popular brands

Load more brands