![background image](http://html1.mh-extra.com/html/d-link/dwl-8600ap/dwl-8600ap_reference-manual_3113755022.webp)
D-Link Unified Access Point CLI Reference Manual
18
© 2001- 2009 D-Link Corporation. All Rights Reserved
IEEE 802.1X S
UPPLICANT
A
UTHENTICATION
Use the 802.1X Supplicant Authentication settings to configure the access point to authenticate to a secured wired network.
Configure the IP address of up to four D-
Link Wireless Switches on your network.
set managed-ap switch-address-1
<ip_address>
set managed-ap switch-address-2
<ip_address>
set managed-ap switch-address-3
<ip_address>
set managed-ap switch-address-4
<ip_address>
Example:
set managed-ap switch-address-1 192.168.2.123
Table 10: IEEE 802.1X Supplicant Commands
Action
Command
Enable 802.1X supplicant
set dot1x-supplicant status up
Disable 802.1X supplicant
set dot1x-supplicant status down
Set the 802.1X user name
set dot1x-supplicant user
<name>
Set the 802.1X password
set dot1x-supplicant password
<password>
Table 9: Managed Access Point Commands
Action
Command
R
ev
ie
w
C
op
y