![background image](http://html.mh-extra.com/html/d-link/dwm-311/dwm-311_user-manual_75785019.webp)
16
D-Link DWM-311 User Manual
Section 3 - Configuration
Name:
Protocol:
External port:
Internal IP
address
Internal port:
Add:
Select a name for the new port forward. This does not affect
functionality.
Select which protocol the port forwarding rule will be applied to.
Select
TCP+UDP
,
TCP
, or
UDP
. If you need a protocol which isn’t
listed, select any protocol here and then edit the corresponding
rule as detailed in “Edit a Port Forward” on page 17.
Select the external port used by the incoming service. The external
port will be exposed directly to the internet.
Specify the IP of the LAN-connected host to which traffic will be
forwarded using this rule.
Specify the internal port to forward to. This is the port to which the
LAN-connected client should be listening.
Once the information has been entered, click
Add
to add the port
forward to the list.
Click
Apply
to save changes or
Reset
to revert changes.
Port Forwards (Cont)
New port forward: