Enable Wireless
: Select this checkbox to enable wireless access. When you set this opLon,
the following parameters take effect.
Wireless Network Name
: Also known as the SSID (Service Set IdenLfier), this is the name of
your wireless network. Enter a name using up to 32 alphanumeric characters. The SSID is
case-‐sensiLve. The default name is“dlink_DWR-‐113”.
802.11 Mode
:
•
B/G mixed: Enable this mode if your network contains a mix of 802.11b and 802.11n
devices. 802.11n devices will not be able to connect to your network in this mode.
•
N mode: Enable this mode if your network has only 802.11n devices.
•
B/G/N mixed: Enable this mode if your network contains a mix of 802.11b, 802.11g, and
802.11n devices.
Auto Channel Scan
: A wireless network uses specific channels in the wireless spectrum to
handle communicaLon between clients. Some channels in your area may experience
interference from other electronic devices. Choose the clearest channel to help opLmize the
performance and coverage of your wireless network.
Visibility Status
: Select whether you wish to make your wireless network
Visible
or
Invisible
to devices scanning for available networks.
Security Mode
: Select the desired security mode from the drop-‐down menu. It is
recommended that you enable
WPA-‐Personal
security if supported by devices on your
network. Select a
WPA Mode
and
Cipher Type
from the drop-‐down menus, and enter a
Network Key
(password) in the field provided. The network key can contain a combinaLon
of le=ers, numbers and symbols 8-‐63 characters in length.
2.How
do I
change
the
Administrator password on my router?
Step 1: Open an Internet browser (such as Internet Explorer) and enter h=p://192.168.0.1
into the address bar. Press Enter.
Summary of Contents for DWR-113
