D-Link DWS-1008 User Manual
8
Configuring a Notification Target
A notification target is a remote device to which MSS sends SNMP notifications. You can configure the
MSS SNMP engine to send confirmed notifications (informs) or unconfirmed notifications (traps). Some
of the command options differ depending on the SNMP version and the type of notification you specify.
You can configure up to 10 notification targets.
To configure a notification target for informs from SNMPv3, use the following command:
set snmp notify target
target-num ip-addr[:udp-port-number]
usm inform user
username
snmp-engine-id {ip | hex
hex-string
} [profile
profile-name
]
[security {unsecured | authenticated | encrypted}]
[retries
num
] [timeout
num
]
To configure a notification target for traps from SNMPv3, use the following command:
set snmp notify target
target-num ip-addr[:udp-port-number]
usm trap user
username
[profile
profile-name
]
[security {unsecured | authenticated | encrypted}]
To configure a notification target for informs from SNMPv2c, use the following command:
set snmp notify target
target-num ip-addr[:udp-port-number]
v2c
community-string
inform [profile
profile-name
] [retries
num
] [timeout
num
]
To configure a notification target for traps from SNMPv2c, use the following command:
set snmp notify target
target-num ip-addr[:udp-port-number]
v2c
community-string
trap [profile
profile-name
]
To configure a notification target for traps from SNMPv1, use the following command:
set snmp notify target
target-num ip-addr[:udp-port-number]
v1
community-string
[profile
profile-name
]
Summary of Contents for DWS-1008
Page 1: ......
