D-Link DWS-1008 User Manual
18
Displaying QoS Information
You can display the following types of information for QoS:
• Radio profile QoS settings: QoS mode, U-APSD support
• Service profile QoS settings: CAC, static CoS, and broadcast control settings
• Broadcast control settings
• Default CoS mappings
• Individual DSCP-to-CoS or CoS-to-DSCP mappings
• The DSCP table (a reference of standard mappings from DSCP to IP ToS and IP
precedence)
• QoS Statistics for the AP forwarding queues
Displaying a Radio Profile’s QoS Settings
To display the QoS mode and all other settings for a radio profile, use the following command:
show radio-profile {
name
| ?}
The following example shows the configuration of radio profile
rp1
.
DWS-1008#
show radio-profile rp1
Beacon Interval: 100
DTIM Interval: 1
Max Tx Lifetime: 2000
Max Rx Lifetime: 2000
RTS Threshold: 2346
Frag Threshold: 2346
Long Preamble: no
Tune Channel: yes
Tune Power: no
Tune Channel Interval: 3600
Tune Power Interval: 600
Power ramp interval: 60
Channel Holddown: 300
Countermeasures: none
Active-Scan: yes
RFID enabled: no
WMM Powersave: no
QoS Mode: wmm
Service profiles: sp1
In this example, the QoS mode is WMM and U-APSD support (WMM powersave) is disabled.
Summary of Contents for DWS-1008
Page 1: ......
