D-Link DWS-1008 User Manual
Setting the 802.1X Timeout for a Client
Use the following command to set the number of seconds before the switch times out an authentication
session with a supplicant (client):
set dot1x timeout supplicant
seconds
The default is 30 seconds. The range of time is from 1 to 65,535 seconds.
For example, type the following command to set the number of seconds for a timeout to 300:
DWS-1008#
set dot1x timeout supplicant 300
success: dot1x supplicant timeout set to 300.
Type the following command to reset the timeout period:
DWS-1008#
clear dot1x timeout supplicant
success: change accepted.
Displaying 802.1X Information
This command displays 802.1X information for clients, statistics, VLANs, and configuration.
show dot1x {clients | stats | config}
•
show dot1x clients displays the username, MAC address, VLAN, and state of active
802.1X clients.
•
show dot1x config displays a summary of the current configuration.
•
show dot1x stats displays global 802.1X statistical information associated with
connecting and authenticating.
Viewing 802.1X Clients
Type the following command to display active 802.1X clients:
DWS-1008#
show dot1x clients
MAC Address
State
Vlan
Identity
-----------------------------------------------------------------------------------------------
00:20:a6:48:01:1f
Connecting
(unknown)
00:05:3c:07:6d:7c
Authenticated
vlan-it
EXAMPLE\smith
00:05:5d:7e:94:83
Authenticated
vlan-eng
EXAMPLE\jgarcia
00:02:2d:86:bd:38
Authenticated
vlan-eng
wong@exmpl.com
00:05:5d:7e:97:b4
Authenticated
vlan-eng
EXAMPLE\hosni
00:05:5d:7e:98:1a
Authenticated
vlan-eng
EXAMPLE\tsmith
00:0b:be:a9:dc:4e
Authenticated
vlan-pm
havel@trpz.com
00:05:5d:7e:96:e3
Authenticated
vlan-eng
EXAMPLE\geetha
00:02:2d:6f:44:77
Authenticated
vlan-eng
EXAMPLE\tamara
00:05:5d:7e:94:89
Authenticated
vlan-eng
EXAMPLE\nwong
00:06:80:00:5c:02
Authenticated
vlan-eng
EXAMPLE\hhabib
Summary of Contents for DWS-1008
Page 1: ......
