D-Link DWS-1008 User Manual
Message Type
Example Log Message
Wireless bridge detected
Wireless bridge detected with address aa:bb:cc:dd:ee:ff.
Seen by AP on port 2, radio 1 on channel 11 with RSSI -53
SSID myssid.
Netstumbler detected
Netstumbler detected from aa:bb:cc:dd:ee:ff. Seen by AP on
port 2, radio 1 on channel 11 with RSSI -53 SSID myssid.
Wellenreiter detected
Wellenreiter detected from aa:bb:cc:dd:ee:ff. Seen by AP on
port 2, radio 1 on channel 11 with RSSI -53 SSID myssid.
Ad-hoc client frame detected
Adhoc client frame detected from aa:bb:cc:dd:ee:ff. Seen by
AP on port 2, radio 1 on channel 11 with RSSI -53 SSID
myssid.
Spoofed AP
AP Mac aa:bb:cc:dd:ee:ff(ssid myssid) is being spoofed.
Received fingerprint 1122343 does not match our fingerprint
123344. Detected by listener aa:bb:cc:dd:ee:fd(port 2, radio
1), channel 11 with RSSI -53.
Disallowed SSID detected
AP Mac aa:bb:cc:dd:ee:ff(ssid myssid) is not part of ssid-
list. Detected by listener aa:bb:cc:dd:ee:fd(port 2, radio 1),
channel 11 with RSSI -53.
AP from disallowed vendor detected
AP Mac aa:bb:cc:dd:ee:ff(ssid myssid) is not part of vendor-
list. Detected by listener aa:bb:cc:dd:ee:fd(port 2, radio 1),
channel 11 with RSSI -53.
Client from disallowed vendor detected
Client Mac aa:bb:cc:dd:ee:ff is not part of vendor-list.
Detected by listener aa:bb:cc:dd:ee:fd(port 2, radio 1),
channel 11 with RSSI -53.
Interfering client seen on wired network
Client Mac aa:bb:cc:dd:ee:ff is seen on the wired network
by 10.1.1.1 on port 3 vlan 2 tag 1. Detected by listener aa:
bb:cc:dd:ee:fd(port 2, radio 1), channel 11 with RSSI -53.
Displaying RF Detection Information
You can use the CLI commands listed in the table below to display rogue detection information.
Command
Description
show rfdetect clients [mac mac-addr]
Displays all wireless clients detected on the air.
show rfdetect counters
Displays statistics for rogue and Intrusion Detection System
(IDS) activity detected by the APs managed by an DWS-
1008 switch.
show rfdetect mobility-domain
[ssid ssid-name | bssid mac-addr]
Displays information about rogues detected in your
network.
show rfdetect data
Displays information about all BSSIDs detected on the
air, and labels those that are from rogues or interfering
devices. This command is valid on any switch in the Mobility
Domain.
show rfdetect visible mac-addr
show rfdetect visible ap AP-num [radio {1 | 2}]
show rfdetect visible dap dap-num [radio {1 | 2}]
Displays the BSSIDs detected by a specific D-Link radio.
Summary of Contents for DWS-1008
Page 1: ......
