D-Link DWS-1008 User Manual
Local Authentication for Console Users and RADIUS
Authentication for Telnet Users
This scenario illustrates how to enable local authentication for console users and RADIUS authentication
for Telnet administrative users. To do so, you configure at least one local username for console
authentication and set up a RADIUS server for Telnet administrators. Natasha types the following
commands in this order:
DWS-1008#
set user natasha password m@Jor
User natasha created
DWS-1008#
set authentication console * local
success: change accepted.
DWS-1008#
set radius server r1 address 192.168.253.1 key sunFLOW#$
success: change accepted.
Natasha also adds the RADIUS server (r1) to the RADIUS server group sg1, and configures Telnet
administrative users for authentication through the group. She types the following commands in this
order:
DWS-1008#
set server group sg1 members r1
success: change accepted.
DWS-1008#
set authentication admin * sg1
success: change accepted.
DWS-1008#
save config
success: configuration saved.
Local Override and Backup Local Authentication
This scenario illustrates how to enable local override authentication for console users. Local override
means that MSS attempts authentication first via the local database. If it finds no match for the user
in the local database, MSS then tries a RADIUS server—in this case, server r1 in server group sg1.
Natasha types the following commands in this order:
DWS-1008#
set user natasha password m@Jor
User natasha created
DWS-1008#
set radius server r1 address 192.168.253.1 key sunFLOW#$
success: change accepted.
DWS-1008#
set server group sg1 members r1
success: change accepted.
DWS-1008#
set authentication console * local sg1
success: change accepted.
DWS-1008#
save config
success: configuration saved.
Summary of Contents for DWS-1008
Page 1: ......
