186
DWS-1008 User’s Manual
D-Link Systems, Inc.
Configuring User Encryption
186
D-Link Systems, Inc.
If you plan to use PSK authentication, you also need to enable this authentication method
and enter an ASCII passphrase or a hexadecimal (raw) key.
Creating a Service Profile for RSN
Encryption parameters apply to all users who use the SSID configured by a service profile.
To create a service profile, use the following command:
set service-profile
name
To create a new service profile named
rsn
, type the following command:
DWS-1008#
set service-profile rsn
success: change accepted.
Enabling RSN
To enable RSN, you must enable the RSN information element (IE) in the service profile. To
enable the RSN IE, use the following command:
set
service-profile
name
rsn-ie
{
enable
|
disable
}
To enable RSN in service profile
wpa
, type the following command:
DWS-1008#
set service-profile rsn rsn-ie enable
success: change accepted.
Specifying the RSN Cipher Suites
To use RSN, at least one cipher suite must be enabled. You can enable one or more of the
following cipher suites:
• CCMP
• TKIP
• 40-bit WEP
• 104-bit WEP
By default, TKIP is enabled and the other cipher suites are disabled.
To enable or disable cipher suites, use the following commands:
set service-profile
name
cipher-ccmp
{
enable
|
disable
}
set service-profile
name
cipher-tkip
{
enable
|
disable
}
set service-profile
name
cipher-wep104
{
enable
|
disable
}
set service-profile
name
cipher-wep40
{
enable
|
disable
}
To enable the CCMP cipher suite in service profile
rsn
, type the following command:
DWS-1008#
set service-profile rsn cipher-ccmp enable
success: change accepted.
After you type this command, the service profile supports both TKIP and CCMP.
Summary of Contents for DWS-1008
Page 1: ......
