187
DWS-1008 User’s Manual
D-Link Systems, Inc.
Configuring User Encryption
187
D-Link Systems, Inc.
Displaying RSN Settings
To display the RSN settings in a service profile, use the following command:
show service-profile
{
name
|
?
}
The RSN settings appear at the bottom of the output.
Note. The RSN-related fields appear in the show service-profile output only when RSN is
enabled.
Assigning the Service Profile to Radios and Enabling the Radios
After you configure RSN settings in a service profile, you can map the service profile to a radio
profile, assign the radio profile to radios, and enable the radios to activate the settings.
To map a service profile to a radio profile, use the following command:
set radio-profile
name
service-profile
name
To assign a radio profile to radios and enable the radios, use the following command:
set ap
port-list
radio
{
1
|
2
}
radio-profile
name
mode
{
enable
|
disable
}
To map service profile
rsn
to radio profile
bldg2
, type the following command:
DWS-1008#
set radio-profile blgd2 service-profile rsn
success: change accepted.
Summary of Contents for DWS-1008
Page 1: ......
