206
DWS-1008 User’s Manual
D-Link Systems, Inc.
Configuring RF Auto-Tuning
To display the RF AutoTuning and other individual radio settings on both radios on the
Distributed AP access point configured on connection 1, type the following command:
DWS-1008#
show dap config 1
Dap 1: serial-id: 12345678, AP model: dwl-8220ap, bias: high, name: DAP01
fingerprint: b4:f9:2a:52:37:58:f4:d0:10:75:43:2f:45:c9:52:c3
boot-download-enable: YES
load balancing group: none
Radio 1: type: 802.11g, mode: disabled, channel: 6
tx pwr: 1, profile: default
auto-tune max-power: default, min-client-rate: 5.5, max-retransmissions: 10
Radio 2: type: 802.11a, mode: disabled, channel: 36
tx pwr: 1, profile: default
auto-tune max-power: default, min-client-rate: 24, max-retransmissions: 10
Displaying RF Neighbors
To display the other radios that a specific D-Link radio can hear, use the following
commands:
show auto-tune neighbors
[
ap
ap-num
[
radio
{
1
|
2
|
all
}]]
show auto-tune neighbors
[
dap
dap-num
[
radio
{
1
|
2
|
all
}]]
The list of radios includes beaconed third-party SSIDs, and both beaconed and unbeaconed
D-Link SSIDs.
To display neighbor information for radio 1 on the directly connected DWL-8220AP access
point on port 2, type the following command:
DWS-1008#
show auto-tune neighbors ap 2 radio 1
Total number of entries for port 2 radio 1: 5
Channel
Neighbor BSS/MAC
RSSI
---------------------------------------------------------------------------
1
00:0b:85:06:e3:60
-46
1
00:0b:0e:00:0a:80
-78
1
00:0b:0e:00:d2:c0
-74
1
00:0b:85:06:dd:00
-50
1
00:0b:0e:00:05:c1
-72
Summary of Contents for DWS-1008
Page 1: ......