214
DWS-1008 User’s Manual
D-Link Systems, Inc.
Configuring and Managing STP
214
D-Link Systems, Inc.
The command applies only to the ports you specify. The port cost on other ports remains
unchanged.
To reset the cost of ports 3 and 4 in the default VLAN to the default value, type the following
command:
DWS-1008#
clear spantree portcost 3-4
success: change accepted.
To reset the cost of ports 3 and 4 for VLAN beige, type the following command:
DWS-1008#
clear spantree portvlancost 3-4 vlan beige
success: change accepted.
Changing the STP Port Priority
To change the priority of a port, use one of the following commands:
set spantree portpri
port-list
priority
value
set spantree portvlanpri
port-list
priority
value
{
all
|
vlan
vlan-id
}
The
set spantree portpri
command changes the priority for ports in the default VLAN
(VLAN 1) only. The
set spantree portvlanpri
command changes the priority for ports in a
specific other VLAN or in all VLANs.
Specify a priority from 0 (highest priority) through 255 (lowest priority). The default is 128.
The
all
option applies the change to all VLANs. Alternatively, specify an individual VLAN.
To set the priority of ports 3 and 4 in the default VLAN to 48, type the following command:
DWS-1008#
set spantree portpri 3-4 priority 48
success: change accepted.
To set the priority of ports 3 and 4 to 48 in VLAN mauve, type the following command:
DWS-1008#
set spantree portvlanpri 3-4 priority 48 vlan mauve
success: change accepted.
Resetting the STP Port Priority to the Default Value
To reset the STP port priority to the default value, use one of the following commands:
clear spantree portpri
port-list
clear spantree portvlanpri
port-list
{
all
|
vlan
vlan-id
}
The command applies only to the ports you specify. The port cost on other ports remains
unchanged.
Summary of Contents for DWS-1008
Page 1: ......
