352
DWS-1008 User’s Manual
D-Link Systems, Inc.
Rogue Detection and Countermeasures
The following example shows the permitted SSID list on the switch:
DWS-1008#
show rfdetect ssid-list
Total number of entries: 3
SSID
-----------------
mycorp
corporate
guest
To remove an SSID from the permitted SSID list, use the following command:
clear
rfdetect
ssid-list
ssid-name
The following command clears SSID
mycorp
from the permitted SSID list:
DWS-1008#
clear rfdetect ssid-list mycorp
success: mycorp is no longer in ssid-list.
Configuring a Client Black List
The client black list specifies clients that are not allowed on the network. MSS drops all
packets from the clients on the black list.
By default, the client black list is empty. In addition to manually configured entries, the list can
contain entries added by MSS. MSS can place a client in the black list due to an association,
reassociation or disassociation flood from the client.
The client black list applies only to the switch on which the list is configured. DWS-1008
switches do not share client black lists.
To add an entry to the list, use the following command:
set
rfdetect
black-list
mac-addr
The following command adds client MAC address 11:22:33:44:55:66 to the black list:
DWS-1008#
set rfdetect black-list 11:22:33:44:55:66
success: MAC 11:22:33:44:55:66 is now blacklisted.
To display the client black list, use the following command:
show rfdetect black-list
Summary of Contents for DWS-1008
Page 1: ......
