89
DWS-1008 User’s Manual
D-Link Systems, Inc.
Configuring and Managing IP Interfaces and Services
The IP interface table flags the address assigned by a DHCP server with an asterisk ( * ). In
the following example, VLAN
corpvlan
received IP address 10.3.1.110 from a DHCP server.
DWS-1008#
show interface
* = From DHCP
VLAN Name
Address
Mask
Enabled
State RIB
--------------------------------------------------------------------------------------------------------------------
4
corpvlan
*10.3.1.110
255.255.255.0
YES
Up ipv4
Displaying DHCP Client Information
To display DHCP client information, type the following command:
DWS-1008#
show dhcp-client
Interface:
corpvlan(4)
Configuration Status: Enabled
DHCP State:
IF_UP
Lease Allocation: 65535 seconds
Lease Remaining: 65532 seconds
IP Address:
10.3.1.110
Subnet Mask:
255.255.255.0
Default Gateway: 10.3.1.1
DHCP Server:
10.3.1.4
DNS Servers:
10.3.1.29
DNS Domain Name: mycorp.com
Disabling or Reenabling an IP Interface
IP interfaces are enabled by default. To administratively disable or reenable an IP interface,
use the following command:
set interface
vlan-id
status
{
up
|
down
}
Removing an IP Interface
To remove an IP interface, use the following command:
clear interface
vlan-id
ip
Note: If you remove the IP interface that is being used as the system IP address, features
that require the system IP address will not work correctly.
Displaying IP Interface Information
To display IP interface information, use the following command:
show interface
[
vlan-id
]
Summary of Contents for DWS-1008
Page 1: ......
