D-Link DWS-1008 User Manual
0
Displaying Port Fast Convergence Information
To display port fast convergence information, use the following command:
show spantree portfast [
port-list
]
To display port fast convergence information for all ports, type the following command:
DWS-1008#
show spantree portfast
Port
Vlan
Portfast
----------------------------------------------------
1
1
disable
2
1
disable
3
1
disable
4
1
enable
5
1
disable
6
2
enable
7
2
disable
8
2
enable
In this example, port fast convergence is enabled on ports 6 and 8 in VLAN 2 and port 4 in VLAN 1.
Configuring Backbone Fast Convergence
To enable or disable backbone fast convergence, use the following command:
set spantree backbonefast {enable | disable}
To enable backbone fast convergence on all VLANs, type the following command:
DWS-1008#
set spantree backbonefast enable
success: change accepted.
Displaying the Backbone Fast Convergence State
To display the state of the backbone fast convergence feature, use the following command:
show spantree backbonefast
Here is an example:
DWS-1008#
show spantree backbonefast
Backbonefast is enabled
In this example, backbone fast convergence is enabled.
Summary of Contents for DWS-1008
Page 1: ......
