manualshive.com logo in svg

D-Link DWS-3024L, User Manual

The D-Link DWS-3024L is an advanced network switch designed for seamless connectivity. With its reliable performance and extensive features, configuring and optimizing your network has never been easier. Enhance your user experience by downloading the free user manual from our website to explore the full potential of this exceptional product.

Share
Download
background image

10    © 2001- 2008 D-Link Corporation.  All Rights Reserved.

D-Link Unified Access System User Manual

Figure 44. AP Network Security Options ........................................................... 101
Figure 45. Static WEP Configuration ................................................................. 102
Figure 46. WPA Personal Configuration ............................................................ 104
Figure 47. Adding a Valid AP ............................................................................ 106
Figure 48. Configuring a Valid AP..................................................................... 107
Figure 49. Access Point Reset ............................................................................ 109
Figure 50. RF Channel Plan and Power Configuration ...................................... 111
Figure 51. Channel Plan History......................................................................... 113
Figure 52. Manual Channel Plan ........................................................................ 114
Figure 53. Manual Power Adjustments .............................................................. 115
Figure 54. AP Upgrade ....................................................................................... 116
Figure 55. AP Upgrade Status. ........................................................................... 117
Figure 56. Advanced AP Management............................................................... 119
Figure 57. Global WLAN Status ........................................................................ 124
Figure 58. Wireless Discovery Status................................................................. 126
Figure 59. Peer Switch Status ............................................................................. 127
Figure 60. All Access Points............................................................................... 127
Figure 61. Managed AP Status ........................................................................... 130
Figure 62. Managed AP Statistics....................................................................... 138
Figure 63. Authentication Failed AP Status ....................................................... 142
Figure 64. RF Scan ............................................................................................. 144
Figure 65. Associated Client Status .................................................................... 145
Figure 66. Client Authentication Failure Status ................................................. 152
Figure 67. Ad Hoc Clients .................................................................................. 153
Figure 68. Multiple AP Profiles.......................................................................... 156
Figure 69. Adding a Profile ................................................................................ 157
Figure 70. Configuring an AP Profile................................................................. 157
Figure 71. Applying the AP Profile .................................................................... 158
Figure 72. Global Configuration......................................................................... 159
Figure 73. SNMP Trap Configuration ................................................................ 161
Figure 74. QoS Configuration ............................................................................ 163
Figure 75. Global Captive Portal Configuration................................................. 167
Figure 76. Captive Portal Summary ................................................................... 168
Figure 77. Captive Portal Configuration............................................................. 170
Figure 78. Captive Portal Local User Summary................................................. 173
Figure 79. Local User Configuration .................................................................. 174
Figure 80. Global Captive Portal Configuration................................................. 175
Figure 81. Global Captive Portal Status ............................................................. 177
Figure 82. CP Activation and Activity Status..................................................... 178
Figure 83. Interface Activation Status ................................................................ 179
Figure 84. Interface Capability Status ................................................................ 181
Figure 85. Client Summary................................................................................. 182
Figure 86. Client Detail ...................................................................................... 183
Figure 87. Client Statistics.................................................................................. 184
Figure 88. Interface - Client Status ..................................................................... 184
Figure 89. CP - Client Status .............................................................................. 185

Summary of Contents for DWS-3024L













































































































































































































































































Reviews:

No comments

Related manuals for DWS-3024L

Homefibre OMA111WLAN-220 Installation Instructions preview
OMA111WLAN-220
Brand: Homefibre Pages: 2
Conrad 61 68 63 Operating Instructions Manual preview
61 68 63
Brand: Conrad Pages: 8
Planet WAP-1960 User Manual preview
WAP-1960
Brand: Planet Pages: 37
Ruijie RG-AP740-I Series Hardware Installation And Reference Manual preview
RG-AP740-I Series
Brand: Ruijie Pages: 31
Technicolor media access tg233 Quick Installation Manual preview
media access tg233
Brand: Technicolor Pages: 6
VXI BT1 User Manual preview
BT1
Brand: VXI Pages: 2
T-Mobile Franklin T9 User Manual preview
Franklin T9
Brand: T-Mobile Pages: 4
T-Mobile Z915 Start Manual preview
Z915
Brand: T-Mobile Pages: 13
T-Mobile webConnect Jet Quick Start Manual preview
webConnect Jet
Brand: T-Mobile Pages: 15
Novatel 4G LTE User Manual preview
4G LTE
Brand: Novatel Pages: 96
Redlion EnterprisePro R-3300 Quick Start Manual preview
EnterprisePro R-3300
Brand: Redlion Pages: 2
Ubiquiti LiteBeam LBE-5AC-16-120 Quick Start Manual preview
LiteBeam LBE-5AC-16-120
Brand: Ubiquiti Pages: 24
New H3C Technologies MSR1000 Series Installation Manual preview
MSR1000 Series
Brand: New H3C Technologies Pages: 31
Planex BLW-HPMM-U User Manual preview
BLW-HPMM-U
Brand: Planex Pages: 113
D-Link DI-804 Connection Manual preview
DI-804
Brand: D-Link Pages: 18
Zte SD6200 User Manual And Safety Information preview
SD6200
Brand: Zte Pages: 36
A4Tech G7-600DX User Manual preview
G7-600DX
Brand: A4Tech Pages: 19
Ubiquiti NanoStation NSM365 Quick Start Manual preview
NanoStation NSM365
Brand: Ubiquiti Pages: 24

Brands by name

Popular brands

Load more brands