manualshive.com logo in svg

D-Link DWS-3024L, User Manual

The D-Link DWS-3024L is an advanced network switch designed for seamless connectivity. With its reliable performance and extensive features, configuring and optimizing your network has never been easier. Enhance your user experience by downloading the free user manual from our website to explore the full potential of this exceptional product.

Share
Download
background image

132    © 2001- 2008 D-Link Corporation.  All Rights Reserved.

D-Link Unified Access System User Manual

Viewing Detailed Managed Access Point Status

To view detailed information about an AP that the switch manages, select the MAC address of 

the AP from the drop-down menu above the table that displays the detailed information. Click 
the Reset button to reset the managed AP. A pop-up asks you to confirm that you want to reset 
the AP. Any wireless clients associated with the access point will be disassociated. To refresh 
the status information for the AP, click Refresh

Table 28

 describes the fields you see on the Detail page for the managed access point status.

Table 28. 

Detailed Managed Access Point Status

Field

Description

MAC Address - 
Location

The label at the top of the table shows the MAC address and location of the 
AP. The location is the value configured in the Valid AP database.

Hardware Type

Type of the AP hardware. It is either DWL-8500AP or DWL-3500AP.

Switch Port

The physical port (in the slot/port format) on the switch that the AP is 
connected to either directly or indirectly in the same L3 domain. If the AP is 
beyond the L3 network boundary, then ‘Unknown’ is displayed.

IP Address

The network IP address of the managed AP.

Profile

The AP profile configuration currently applied to the managed AP, the 
profile is assigned to the AP in the valid AP database. Note: Once an AP is 
discovered and managed by the Unified Switch, if the profile is changed in 
the valid AP database (either locally or on the RADIUS server) the AP must 
be reset to configure with the new profile.

Status

The current managed state of the AP. The possible values are:

•

Discovered - The AP is discovered and by the switch, but is not yet 
authenticated.

•

Authenticated - The AP has been validated and authenticated (if 
authentication is enabled), but it is not configured.

•

Managed - The AP profile configuration has been applied to the AP and 
it's operating in managed mode.

•

Failed - The Unified Switch lost contact with the AP, a failed entry will 
remain in the managed AP database unless you remove it. Note that a 
managed AP will temporarily show a failed status during a reset.

Discovery Reason

This status value indicates how the managed AP was discovered, the status is 
one of the following values:

•

IP Poll Received - The AP was discovered via an IP poll from the 
Unified Switch, its IP address is configured in the IP polling list.

•

Peer Redirect - The AP was discovered through a peer switch redirect, 
the AP tried to associate with another peer switch and learned the 
current Unified Switch IP address from the peer (peer learned Unified 
Switch IP address in RADIUS server response when validating the AP).

•

Switch IP Configured - The managed AP is configured with the Unified 
Switch IP address.

•

Switch IP DHCP - The managed AP learned the current Unified Switch 
IP address through DHCP option 43.

•

L2 Poll Received - The AP was discovered through the D-Link Wireless 
Device Discovery protocol.

Summary of Contents for DWS-3024L













































































































































































































































































Reviews:

No comments

Related manuals for DWS-3024L

D-Link DWR-730 Configuration Manual preview
DWR-730
Brand: D-Link Pages: 9
D-Link DWL-7100AP Quick Install Manual preview
DWL-7100AP
Brand: D-Link Pages: 52
D-Link DWL-3140AP - Web Smart PoE Thin Access Point Install Manual preview
DWL-3140AP - Web Smart PoE Thin Access Point
Brand: D-Link Pages: 16
D-Link DWL-3140AP - Web Smart PoE Thin Access Point User Manual preview
DWL-3140AP - Web Smart PoE Thin Access Point
Brand: D-Link Pages: 46
D-Link DWL-2100AP - AirPlus Xtreme G Command Line Interface Reference Manual preview
DWL-2100AP - AirPlus Xtreme G
Brand: D-Link Pages: 29
D-Link DWL-2100AP - AirPlus Xtreme G Install Manual preview
DWL-2100AP - AirPlus Xtreme G
Brand: D-Link Pages: 12
D-Link DIR-320NRU Quick Installation Manual preview
DIR-320NRU
Brand: D-Link Pages: 37
D-Link DAP-3220 Install Manual preview
DAP-3220
Brand: D-Link Pages: 10
D-Link DAP-2330 v 1.0 Quick Install Manual preview
DAP-2330 v 1.0
Brand: D-Link Pages: 16
D-Link DAP-1160 Quick Install Manual preview
DAP-1160
Brand: D-Link Pages: 32
D-Link D DWL-8200AP DWL-8200AP Quick Install Manual preview
D DWL-8200AP DWL-8200AP
Brand: D-Link Pages: 10
D-Link D DWL-8200AP DWL-8200AP User Manual preview
D DWL-8200AP DWL-8200AP
Brand: D-Link Pages: 97
D-Link D DWL-8200AP DWL-8200AP Install Manual preview
D DWL-8200AP DWL-8200AP
Brand: D-Link Pages: 16
D-Link D DWL-8200AP DWL-8200AP Manual preview
D DWL-8200AP DWL-8200AP
Brand: D-Link Pages: 129
D-Link AirPremier DWL-7700AP Install Manuals preview
AirPremier DWL-7700AP
Brand: D-Link Pages: 12
D-Link AirPremier DWL-7700AP User Manual preview
AirPremier DWL-7700AP
Brand: D-Link Pages: 84
D-Link DWL-7100AP Manual preview
DWL-7100AP
Brand: D-Link Pages: 76
D-Link DWL-7100AP Quick Installation Manual preview
DWL-7100AP
Brand: D-Link Pages: 8

Brands by name

Popular brands

Load more brands