manualshive.com logo in svg

D-Link DWS-3024L, User Manual

The D-Link DWS-3024L is an advanced network switch designed for seamless connectivity. With its reliable performance and extensive features, configuring and optimizing your network has never been easier. Enhance your user experience by downloading the free user manual from our website to explore the full potential of this exceptional product.

Share
Download
background image

22    © 2001- 2008 D-Link Corporation.  All Rights Reserved.

D-Link Unified Access System User Manual

D-Link Unified Switch

The D-Link Unified Switch handles Layer 2, 3, and 4 switching and routing functions for 
traffic on the wired and wireless LAN. The DWS-3024L manages up to 24 access points 
(APs), and the DWS-3024 and DWS-3026 switches manage up to 48 APs. The Unified Switch 
user interface allows you to configure and monitor all AP settings and maintain a consistent 
configuration among all APs in the network. 

The Unified Switch supports advanced data path connectivity, mobility control, security 
safeguards, control over radio and power parameters, and management features for both 
network and element control. The Unified Switch allows you to control the discovery, 
validation, authentication, and monitoring of peer Unified Switches, D-Link Access Points, 
and clients on the WLAN, including discovery and status of rogue APs and clients.

The D-Link Unified Access System works with the following D-Link switches:

•

DWS-3024 (24 GE ports)

•

DWS-3024L (24 GE ports)

•

DWS-3026 (24 GE ports + 2 10G ports)

D-Link Access Point

The D-Link Access Point can operate in one of two modes: Standalone Mode or Managed 
Mode. In Standalone Mode, the D-Link Access Point acts as an individual access point in the 
network, and you manage it by connecting to the AP and using the Administrator Web User 
Interface (UI) or command-line interface (CLI). In Managed Mode, the D-Link Access Point 
is part of the D-Link Unified Access System, and you manage it by using the D-Link Unified 
Switch. If an AP is in Managed Mode, the Administrator Web UI services on the AP are 
disabled. Access is limited to the CLI through Telnet.

The Standalone Mode is appropriate for small networks with only a few APs. The Managed 
Mode is useful for any size network. If you start out with D-Link Access Points in Standalone 
Mode, you can easily transition the APs to Managed Mode when you add a Unified Switch to 
the network. By using the AP in Managed Mode, you can centralize AP management and 
streamline the AP upgrade process by pushing configuration profiles and software upgrades 
from the Unified Switch to the managed APs. The D-Link Unified Access System User Manual 
primarily describes the D-Link Access Point in Managed Mode. For information about 
configuring the D-Link Access Point in Standalone Mode, see the Unified Access Point (AP) 
Administrator’s Guide.

The D-Link Unified Access System works with the following D-Link access points:

•

DWL-3500AP

•

DWL-8500AP

The DWL-3500AP supports one radio, and the DWL-8500AP supports two radios. The DWL-
3500AP radio and one of the DWL-8500AP radios operate in IEEE 802.11g mode. The second 
radio on the DWL-8500AP operates in IEEE 802.11a mode. 

Each access point supports up to eight virtual access points (VAPs) on each radio. The VAP 
feature allows you to segment each physical access point into eight logical access points (per 
radio) that each support a unique SSID, VLAN ID, and security policy. 

Summary of Contents for DWS-3024L













































































































































































































































































Reviews:

No comments

Related manuals for DWS-3024L

Panasonic PAN1026A Design Manual preview
PAN1026A
Brand: Panasonic Pages: 20
SMC Networks EliteConnect SMC2555W-AG2 Specifications preview
EliteConnect SMC2555W-AG2
Brand: SMC Networks Pages: 2
US Robotics 8004 - Quick Installation Manual preview
8004 -
Brand: US Robotics Pages: 108
ICP DAS USA WF-2015 User Manual preview
WF-2015
Brand: ICP DAS USA Pages: 61
Youwon ZF01-C Operation Manual preview
ZF01-C
Brand: Youwon Pages: 4
ADTRAN BLUESOCKET 3045 Quick Start preview
BLUESOCKET 3045
Brand: ADTRAN Pages: 2
Acksys AirBox Series Manual preview
AirBox Series
Brand: Acksys Pages: 36
Siemens RUGGEDCOM WIN5137 Installation Manual preview
RUGGEDCOM WIN5137
Brand: Siemens Pages: 38
Siemens RUGGEDCOM WIN5214 Installation Manual preview
RUGGEDCOM WIN5214
Brand: Siemens Pages: 42
Siemens HiPath V6R1 Installation Manual preview
HiPath V6R1
Brand: Siemens Pages: 54
Siemens SCALANCE W700 Reference Manual preview
SCALANCE W700
Brand: Siemens Pages: 92
Siemens 6GK5748-1GY01-0AA0 Operating Instructions Manual preview
6GK5748-1GY01-0AA0
Brand: Siemens Pages: 91
Siemens SCALANCE W744-1 Compact Operating Instructions preview
SCALANCE W744-1
Brand: Siemens Pages: 99
Siemens SCALANCE W1750D UI Configuration Manual preview
SCALANCE W1750D UI
Brand: Siemens Pages: 570
Icidu NI-707517 Owner'S Manual preview
NI-707517
Brand: Icidu Pages: 11
Icidu NI-707540 Manual preview
NI-707540
Brand: Icidu Pages: 16
Icidu NI-707521 Handleiding preview
NI-707521
Brand: Icidu Pages: 19
NLT AS14006 Manual preview
AS14006
Brand: NLT Pages: 22

Brands by name

Popular brands

Load more brands