manualshive.com logo in svg

D-Link DWS-3024L, User Manual

The D-Link DWS-3024L is an advanced network switch designed for seamless connectivity. With its reliable performance and extensive features, configuring and optimizing your network has never been easier. Enhance your user experience by downloading the free user manual from our website to explore the full potential of this exceptional product.

Share
Download
background image

D-Link Unified Access System User Manual

Installing the Switch in a Rack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   45
Powering On the Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   46
Installing the SFP ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   46
Installing the Optional Modules  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   47
Connecting to the External Redundant Power System  . . . . . . . . . . . . . . . . . .   49

Connecting the Switch  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   49

Connecting the Switch to the Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   50
Connecting the Switch and AP Directly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   50
Connecting the Switch and AP through the L2/L3 Network  . . . . . . . . . . . . . .   51
Connecting to the Core Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   51

4 Installing the D-Link Unified Access System  . . . . . . . . . . . . . .53

System Deployment Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   53
Connecting the Switch to the Network  . . . . . . . . . . . . . . . . . . . . . . . . . . . .   55
Enabling the WLAN Features on the Switch. . . . . . . . . . . . . . . . . . . . . . . .   56
Preparing the Access Points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   58

Logging on to the AP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   58
Changing the AP Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   59
Configuring 802.1X Authentication Information on the AP  . . . . . . . . . . . . . .   59
Configuring AP-to-Switch Authentication Information . . . . . . . . . . . . . . . . . .   60
Configuring VLAN Information on the Access Point. . . . . . . . . . . . . . . . . . . .   60

Discovering Access Points and Peer Switches . . . . . . . . . . . . . . . . . . . . . .   61

Understanding the Discovery Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   61
Discovery and Peer Switches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   64
Assigning the IP Address to Switches and Managed APs . . . . . . . . . . . . . . . .   64
Enabling the AP and Peer Switch Discovery. . . . . . . . . . . . . . . . . . . . . . . . . .   67

Authenticating and Validating Access Points . . . . . . . . . . . . . . . . . . . . . . .   74

Configuring AP Authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   75
Using the Local Database for AP Validation. . . . . . . . . . . . . . . . . . . . . . . . . .   76
Using the RADIUS Database for AP Validation . . . . . . . . . . . . . . . . . . . . . . .   78
Managing Failed or Rogue APs  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   80

5 Configuring Access Point Settings . . . . . . . . . . . . . . . . . . . . . . .83

AP Profiles, Networks, and the Local Database . . . . . . . . . . . . . . . . . . . .   83

Access Point Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   83
Networks  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   84
Local Access Point Database. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   84

Configuring AAA and RADIUS Settings . . . . . . . . . . . . . . . . . . . . . . . . .   85
Configuring Wireless Radio Settings  . . . . . . . . . . . . . . . . . . . . . . . . . . . .   87
Configuring SSID Settings  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   92

Managing Virtual Access Point Configuration . . . . . . . . . . . . . . . . . . . . . . . .   93
Configuring the Default Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   94
Enabling and Configuring Additional VAPs . . . . . . . . . . . . . . . . . . . . . . . . . .   98
Configuring a VAP for L3 Tunnels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   99
Configuring AP Security  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   101

Configuring Valid Access Point Settings  . . . . . . . . . . . . . . . . . . . . . . . .   106

6 Managing and Maintaining D-Link Access Points . . . . . . . . .109

Resetting the Access Points  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   109
Managing Radio Frequency Settings . . . . . . . . . . . . . . . . . . . . . . . . . . .   110

Summary of Contents for DWS-3024L













































































































































































































































































Reviews:

No comments

Related manuals for DWS-3024L

D-Link DAP-1720 Quick Install Manual preview
DAP-1720
Brand: D-Link Pages: 24
D-Link DGL-4500 - GamerLounge Xtreme N Gaming Router... User Manual preview
DGL-4500 - GamerLounge Xtreme N Gaming Router...
Brand: D-Link Pages: 108
D-Link DAP-3520 - AirPremier N Dual Band Exterior PoE Access... Command Line Interface Reference Manual preview
DAP-3520 - AirPremier N Dual Band Exterior PoE Access...
Brand: D-Link Pages: 38
D-Link DAP-3520 - AirPremier N Dual Band Exterior PoE Access... User Manual preview
DAP-3520 - AirPremier N Dual Band Exterior PoE Access...
Brand: D-Link Pages: 80
D-Link DAP-2590 - AirPremier N Dual Band PoE Access... Quick Installation Manual preview
DAP-2590 - AirPremier N Dual Band PoE Access...
Brand: D-Link Pages: 36
Microsemi PD-9501G/24AC User Manual preview
PD-9501G/24AC
Brand: Microsemi Pages: 2
P-Com AirPro Gold Hardware Installation Manual preview
AirPro Gold
Brand: P-Com Pages: 54
Edimax EW-7416APn Quick Installation Manual preview
EW-7416APn
Brand: Edimax Pages: 15
Planet WNAP-3000PE Quick Installation Manual preview
WNAP-3000PE
Brand: Planet Pages: 8
Ubiquiti Rocket5AC R5AC-PTP Quick Start Manual preview
Rocket5AC R5AC-PTP
Brand: Ubiquiti Pages: 13
Loopcomm LP-9318A User Manual preview
LP-9318A
Brand: Loopcomm Pages: 36
D-Link AirPremier DAP-2565 Brochure & Specs preview
AirPremier DAP-2565
Brand: D-Link Pages: 4
D-Link DAP-2330 v 1.0 Quick Installation Manual preview
DAP-2330 v 1.0
Brand: D-Link Pages: 48
D-Link DAP-3220 User Manual preview
DAP-3220
Brand: D-Link Pages: 69
D-Link DAP-3310 User Manual preview
DAP-3310
Brand: D-Link Pages: 91
D-Link AirPlus Xtreme G DWL-2000AP Quick Installation Manual preview
AirPlus Xtreme G DWL-2000AP
Brand: D-Link Pages: 12
D-Link AirPremier DWL-1700AP Quick Installation Manual preview
AirPremier DWL-1700AP
Brand: D-Link Pages: 12
D-Link AirPremier DWL-3200AP Install Manual preview
AirPremier DWL-3200AP
Brand: D-Link Pages: 8

Brands by name

Popular brands

Load more brands