manualshive.com logo in svg

D-Link DWS-3024L, User Manual

The D-Link DWS-3024L is an advanced network switch designed for seamless connectivity. With its reliable performance and extensive features, configuring and optimizing your network has never been easier. Enhance your user experience by downloading the free user manual from our website to explore the full potential of this exceptional product.

Share
Download
background image

Enabling the WLAN Features on the Switch    57

4   Installing the D-Link Unified Access System

From the CLI, you can view the same information that is available on the Wireless Global 
Configuration page with the 

show wireless

 command in Privileged EXEC mode. If you 

need to change the country code, you can view the list of available countries and their two-
letter codes with the 

show wireless country-code

 command.

WLAN Switch

 

Disable Reason

If the status is disabled, this field appears and one of the following reasons is 
listed:

•

None—The cause for the disabled status is unknown.

•

Administrator disabled—The Enable WLAN Switch check box has been 
cleared.

•

No IP Address—The WLAN interface does not have an IP address.

•

No SSL Files—The D-Link Unified Switch communicates with the APs 
it manages by using Secure Sockets Layer (SSL) connections. The first 
time you power on the Unified Switch, it automatically generates a 
server certificate that will be used to set up the SSL connections. The 
SSL certificate and key generation can take up to an hour to complete.

If routing is enabled on the switch, the operational status might be disabled 
due to one of the following reasons:

•

No Loopback Interface—The switch does not have a loopback interface.

•

Global Routing Disabled—Even if the routing mode is enabled on the 
WLAN switch interface, it must also be enabled globally for the 
operational status to be enabled.

For information about how to configure a loopback interface and enable 
routing, see 

“D-Link Unified Switch with Routing Enabled” 

on page 65.

IP Address

This field shows the IP address of the WLAN interface on the switch. If 
routing is disabled, the IP address is the network interface. If routing is 
enabled, this is the IP address of the routing or loopback interface you 
configure for the Unified Switch features.

AP Authentication

Select the check box to require APs to be authenticated before they can 
associate with the switch.

AP MAC 
Validation

Select the database to use for AP validation.

•

Local—If you select this option, you must add the MAC address of each 
AP to the local Valid AP database.

•

RADIUS—If you select this option, you must configure the MAC 
address of each AP in an external RADIUS server.

Country Code

Select the country code for the country where your switch and APs operate. 
A popup window asks you to confirm the change.

Wireless regulations vary from country to country. Make sure you select the 
correct country code so that your WLAN system complies with the 
regulations in your country. Some WLAN modes, such as the Atheros 
modes, are not available in some countries. 

Changing the country code disables and re-enables the switch. Any channel 
and radio mode settings that are invalid for the regulatory domain are reset to 
the default values.

The country code (IEEE 802.11d) is transmitted in beacons and probe 
responses from the access points.

Table 3. 

Basic Wireless Global Configuration

Field

Description

Summary of Contents for DWS-3024L













































































































































































































































































Reviews:

No comments

Related manuals for DWS-3024L

D-Link Rangebooster N 650 Access Point DAP-1353 User Manual preview
Rangebooster N 650 Access Point DAP-1353
Brand: D-Link Pages: 67
D-Link DWL-1000AP Quick Install Manual preview
DWL-1000AP
Brand: D-Link Pages: 8
D-Link COVR-2202 Simple Setup Manual preview
COVR-2202
Brand: D-Link Pages: 2
D-Link DAP-1155 Quick Install Manual preview
DAP-1155
Brand: D-Link Pages: 3
D-Link Air Premier DAP-2695 Command Line Interface Reference Manual preview
Air Premier DAP-2695
Brand: D-Link Pages: 39
D-Link AirPlus DI-714P+ Brochure preview
AirPlus DI-714P+
Brand: D-Link Pages: 5
D-Link AC5300 Quick Install Manual preview
AC5300
Brand: D-Link Pages: 12
D-Link SharePort DIR-825 Configuring preview
SharePort DIR-825
Brand: D-Link Pages: 20
D-Link Express EtherNetwork DI-604 Owner'S Manual preview
Express EtherNetwork DI-604
Brand: D-Link Pages: 49
Arris VAP4641 Quick Start Manual preview
VAP4641
Brand: Arris Pages: 2
Ebyte E30-900M30S Quick Start Manual preview
E30-900M30S
Brand: Ebyte Pages: 11
TP-Link Auranet EAP110 Quick Installation Manual preview
Auranet EAP110
Brand: TP-Link Pages: 2
IgniteNet MetroLinq2.5 ML2.5-60-35 Quick Start Manual preview
MetroLinq2.5 ML2.5-60-35
Brand: IgniteNet Pages: 9
Universal Scientific Industrial Co. AP-AG-AT-02 User Manual preview
AP-AG-AT-02
Brand: Universal Scientific Industrial Co. Pages: 19
D-Link DWR-953V2 Quick Installation Manual preview
DWR-953V2
Brand: D-Link Pages: 64
D-Link DWR-910 Technical Support Setup Procedure preview
DWR-910
Brand: D-Link Pages: 3
D-Link DWR-910 Quick Installation Manual preview
DWR-910
Brand: D-Link Pages: 4
D-Link DWM-315 Quick Installation Manual preview
DWM-315
Brand: D-Link Pages: 36

Brands by name

Popular brands

Load more brands