DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
206
level setting regarding STP is not displayed. The lower level setting will only be displayed
when the higher level setting is enabled.
modified
- Display only the commands which are not from the ‘reset’ default setting.
current_config
- Specifies the current configuration.
boot_up
- Specifies the list of the boot-up configuration.
file
- Specifies that the unit can display the specified configuration file.
<pathname 64>
- The pathname specifies an absolute pathname on the device file system. If
pathname is not specified, the boot up configuration is implied. This name can be up to 64
characters long.
<filter_string 80>
- (Optional) A filter string is enclosed by symbol ". Thus, the filter string itself
cannot contain the “character. The filter string is case sensitive. This value can be up to 80
characters long.
include
- Includes lines that contain the specified filter string.
exclude
- Excludes lines that contain the specified filter string
begin
- The first line that contains the specified filter string will be the first line of the output.
Restrictions
Only Administrators can issue this command.
Example
The following example illustrates how the special filters ‘modified’ affect the configuration display:
DWS-3160-24PC:admin#show config modified
Command: show config modified
#------------------------------------------------------------------------------
# DWS-3160-24PC Gigabit Ethernet Switch
# Configuration
#
# Firmware: Build 1.00.034
# Copyright(C) 2012 D-Link Corporation. All rights reserved.
#------------------------------------------------------------------------------
# DEVICE
# BASIC
# ACCOUNT LIST
create account admin admin
*@&2jmj7l5rSw0yVb/vlWAYkK/YBwmwMs6D
*@&2jmj7l5rSw0yVb/vlWAYkK/YBwmwMs6D
CTRL+C
ESC
q
Quit
SPACE
n
Next Page
ENTER
Next Entry
a
All
The following example illustrates how the special filters ’effective’ affect the configuration display:
