DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
342
DWS-3160-24PC:admin#config igmp_snooping static_group vlan v2 239.1.1.1 delete
24
Command: config igmp_snooping static_group vlan v2 239.1.1.1 delete 24
Success.
DWS-3160-24PC:admin#
32-11
show igmp_snooping static_group
Description
This command is used to display the IGMP snooping multicast group static members.
Format
show igmp_snooping static_group {[vlan <vlan_name 32> | vlanid <vlanid_list>] <ipaddr>}
Parameters
vlan
- Specifies the name of the VLAN on which the static group resides.
<vlan_name 32>
- Enter the VLAN name here. The VLAN name can be up to 32 characters
long.
vlanid
- Specifies the ID of the VLAN on which the static group resides.
<vlanid_list>
- Enter the VLAN ID here.
<ipaddr>
- Specifies the multicast group IP address.
Restrictions
None.
Example
To display all the IGMP snooping static groups:
DWS-3160-24PC:admin#show igmp_snooping static_group
Command: show igmp_snooping static_group
VLAN ID/Name IP Address Static Member Ports
------------------------------------- --------------- ----------------------
2 /v2 239.1.1.1 20-23
Total Entries : 1
DWS-3160-24PC:admin#
32-12
config igmp_snooping data_driven_learning
Description
This command is used to enable or disable the data driven learning of an IGMP snooping group.
When data-driven learning is enabled for the VLAN, when the Switch receives the IP multicast
traffic on this VLAN, an IGMP snooping group will be created. That is, the learning of an entry is
