DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
424
Chapter 42
MAC-based Access Control
Command List
enable mac_based_access_control
disable mac_based_access_control
config mac_based_access_control password
<passwd 16>
config mac_based_access_control method
[local | radius]
config mac_based_access_control guest_vlan ports
<portlist>
config mac_based_access_control ports
[<portlist> | all] {state [enable | disable] | mode
[port_based | host_based] | aging_time [infinite | <min 1-1440>] | block_time <sec 0-300> |
max_users [<value 1-1000> | no_limit]}(1)
create mac_based_access_control
[guest_vlan <vlan_name 32> | guest_vlanid <vlanid 1-
4094>]
delete mac_based_access_control
[guest_vlan <vlan_name 32> | guest_vlanid <vlanid 1-
4094>]
clear mac_based_access_control auth_state
[ports [all | <portlist>] | mac_addr <macaddr>]
create mac_based_access_control_local mac
<macaddr> {[vlan <vlan_name 32> | vlanid <
vlanid 1-4094>]}
config mac_based_access_control_local mac
<macaddr> [vlan <vlan_name 32> | vlanid
<vlanid 1-4094> | clear_vlan]
delete mac_based_access_control_local
[mac <macaddr> | vlan <vlan_name 32> | vlanid
<vlanid 1-4094>]
config mac_based_access_control authorization attributes
{radius [enable | disable] | local
[enable | disable]}(1)
show mac_based_access_control
{ports {<portlist>}}
show mac_based_access_control_local
{[mac <macaddr> | vlan <vlan_name 32> | vlanid
<vlanid 1-4094>]}
show mac_based_access_control auth_state ports
{<portlist>}
config mac_based_access_control max_users
[<value 1-1000> | no_limit]
config mac_based_access_control trap state
[enable | disable]
config mac_based_access_control log state
[enable | disable]
42-1
enable mac_based_access_control
Description
This command is used to enable MAC-based Access Control.
Format
enable mac_based_access_control
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
