DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
48
4-12
config 802.1x max_users
Description
This command is used to configure the maximum number of users that can be learned via 802.1X
authentication. In addition to the global limitation, maximum users per port are also limited. It can
be configured using the ‘config 802.1x auth_parameter’ command.
Format
config 802.1x max_users [<value 1–448> | no_limit]
Parameters
max_users
- Specifies the maximum number of users.
<value 1-448>
- Enter the maximum users value here. This value must be between 1 and
448.
no_limit
– Specifies that the maximum user limit will be set to 448.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure a maximum of 200, 802.1X users:
DWS-3160-24PC:admin# config 802.1x max_users 200
Command: config 802.1x max_users 200
Success.
DWS-3160-24PC:admin#
4-13
config 802.1x auth_parameter
Description
This command is used to configure the parameters that control the operation of the authenticator
associated with a port.
Format
config 802.1x auth_parameter ports [<portlist> | all] [default | {direction [both | in] |
port_control [force_unauth | auto | force_auth] | quiet_period <sec 0-65535> | tx_period
<sec 1-65535> | supp_timeout <sec 1-65535> | server_timeout <sec 1-65535> | max_req
<value 1-10> | reauth_period <sec 1-65535> | max_users [<value 1-448> | no_limit] |
enable_reauth [enable | disable]}(1)]
