DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
630
Chapter 67
Single IP Management
Command List
enable sim
disable sim
show sim
{[candidates {<candidate_id 1-100>} | members {<member_id 1-4>} | group
{commander_mac <macaddr>} | neighbor]}
reconfig
[member_id <value 1-4> | exit]
config sim_group
[add <candidate_id 1-100> {<password>} | delete <member_id 1-4>]
config sim
[{[commander {group_name <groupname 64>} | candidate] | dp_interval <sec 30-90> |
hold_time <sec 100-255>}]
download sim_ms
[firmware_from_tftp | configuration_from_tftp] <ipaddr> <path_filename>
{[members <mslist 1-4> | all]}
upload sim_ms
[configuration_to_tftp | log_to_tftp] <ipaddr> <path_filename> [members <mslist>
| all]
67-1
enable sim
Description
This command is used to enable the Single IP Management (SIM) feature on the Switch.
Format
enable sim
Parameters
None.
Restrictions
Only Administrators can issue this command.
Example
To enable SIM:
DWS-3160-24PC:admin# enable sim
Command: enable sim
Success.
DWS-3160-24PC:admin#
67-2
disable sim
Description
This command is used to disable the SIM feature on the Switch.
