DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
657
Chapter 71
TELNET Client Command
List
telnet
[<ipaddr> | <ipv6addr>] {tcp_port <value 1-65535>}
71-1
telnet
Description
This command is used to start the TELNET client to connect to the specific TELNET server. The
parameters specified by the command will only be used for the establishment of this specific
session. They will not affect the establishment of other sessions.
Format
telnet [<ipaddr> | <ipv6addr>] {tcp_port <value 1-65535>}
Parameters
<ipaddr>
- The IP address of the TELNET server.
<ipv6addr>
- The IPv6 address of the TELNET server.
tcp_port
- (Optional) Specifies the TELNET server port number to be connected. If not specified,
the default port is 23.
<value 1-65535>
- Enter the TCP port number used here. This value must be between 1 and
65535.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
TELNET to a Switch by Specifiesing the IP address:
DWS-3160-24PC:admin# telnet 10.90.90.90
Command: telnet 10.90.90.90
DWS-3160-24TC Gigabit Ethernet Switch
Command Line Interface
Firmware: Build 1.00.034
Copyright(C) 2012 D-Link Corporation. All rights reserved.
UserName:
