manualshive.com logo in svg

D-Link DWS-3160-24TC, Cli Reference Manual

The D-Link DWS-3160-24TC is a powerful network switch designed for seamless connectivity and efficient network management. This high-performance product offers advanced features and robust capabilities. To access its comprehensive manual and datasheet, visit our website and download them for free, empowering you with valuable information for optimal usage.

Share
Download
background image

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide 

819 

 

Chapter 92

 

Wireless QoS Command List 

 

create wireless access_list

 [mac <name 1-31> | ip [standard <int 1-99> | extended <int 100-199> 

| name <name 1-31>] | ipv6 <name 1-31>] 

delete wireless access_list

 [mac <name 1-31> | ip [standard <int 1-99> | extended <int 100-199> 

| name <name 1-31>] | ipv6 <name 1-31>] 

config wireless access_list ip extended

 <int 100-199> [add_rule <value 1-12> type [deny | 

permit] match_every [true | false {srcip <ipaddr> srcmask <netmask> | dstip <ipaddr> 
dstmask <netmask> | src_layer4_port [domain | echo | ftp | ftpdata | http | smtp | snmp | telnet 
| tftp | other <int 0-65535>] | dst_layer4_port [domain | echo | ftp | ftpdata | http | smtp | snmp | 
telnet | tftp | other <int 0-65535>] | protocol [ip | icmp | igmp | tcp | udp | other <int 1-255>] | 
service [ip_precedence <value 0-7> | ip_tos tos_bit <hex 0x00-0xff> tos_mask <hex 0x00-
0xff> | ip_dscp [af11 | af12 | af13 | af21 | af22 | af23 | af31 | af32 | af33 | af41 | af42 | af43 | be 
| cs0 | cs1 | cs2 | cs3 | cs4 | cs5 | cs6 | cs7 | ef | other <int 0-63>]]}] | del_rule <value 1-12> | 
edit_rule <value 1-12> [type [deny | permit] | match_every [true | false] | srcip <ipaddr> 
srcmask <netmask> | src_layer4_port [domain | echo | ftp | ftpdata | http | smtp | snmp | telnet 
| tftp | other <int 0-65535>] | dstip <ipaddr> dstmask <netmask> | dst_layer4_port [domain | 
echo | ftp | ftpdata | http | smtp | snmp | telnet | tftp | other <int 0-65535>] | protocol [ip | icmp | 
igmp | tcp | udp | other <int 1-255>] | service [ip_precedence <value 0-7> | ip_tos tos_bit <hex 
0x00-0xff> tos_mask <hex 0x00-0xff> | ip_dscp [af11 | af12 | af13 | af21 | af22 | af23 | af31 | 
af32 | af33 | af41 | af42 | af43 |be | cs0 | cs1 | cs2 | cs3 | cs4 | cs5 | cs6 | cs7 | ef | other <int 0-
63>]]]] 

config wireless access_list ip name

 <name 1-31> [rename <name 1-31> | add_rule <value 1-

12> type [deny | permit] match_every [true | false {srcip <ipaddr> srcmask <netmask> | dstip 
<ipaddr> dstmask <netmask> | src_layer4_port [domain | echo | ftp | ftpdata | http | smtp | 
snmp | telnet | tftp | other <int 0-65535>] | dst_layer4_port [domain | echo | ftp | ftpdata | http | 
smtp | snmp | telnet | tftp | other <int 0-65535>] | protocol [ip | icmp | igmp | tcp | udp | other 
<int 1-255>] | service [ip_precedence <value 0-7> | ip_tos tos_bit <hex 0x00-0xff> tos_mask 
<hex 0x00-0xff> | ip_dscp [af11 | af12 | af13 | af21 | af22 | af23 | af31 | af32 | af33 | af41 |af42 
| af43 | be | cs0 | cs1 | cs2 | cs3 | cs4 | cs5 | cs6 | cs7 | ef | other <int 0-63>]]}] | del_rule 
<value 1-12> | edit_rule <value 1-12> [type [deny | permit] | match_every [true | false] | srcip 
<ipaddr> srcmask <netmask> | src_layer4_port [domain | echo | ftp | ftpdata | http | smtp | 
snmp | telnet | tftp | other <int 0-65535>] | dstip <ipaddr> dstmask <netmask> | 
dst_layer4_port [domain | echo | ftp | ftpdata | http | smtp | snmp | telnet | tftp | other <int 0-
65535>] | protocol [ip | icmp | igmp | tcp | udp | other <int 1-255>] | service [ip_precedence 
<value 0-7> | ip_tos tos_bit <hex 0x00-0xff> tos_mask <hex 0x00-0xff> | ip_dscp [af11 | af12 | 
af13 | af21 | af22 | af23 | af31 | af32 | af33 | af41 | af42 | af43 | be | cs0 | cs1 | cs2 | cs3 | cs4 | 
cs5 | cs6 | cs7 | ef | other <int 0-63>]]]] 

config wireless access_list ip standard

 <int 1-99> [add_rule <value 1-12> type [deny | permit] 

match_every [true | false {srcip <ipaddr> srcmask <netmask>}] | del_rule <value 1-12> | 
edit_rule <value 1-12> [type [deny | permit] | match_every [true | false] | srcip <ipaddr> 
srcmask <netmask>]] 

config wireless access_list ipv6

 <name 1-31> [rename <name 1-31> | add_rule <value 1-10> 

type [deny | permit] match_every [true | false {src_ipv6 src_prefix <ipv6addr> 
src_prefix_length <int 1-128> | dst_ipv6 dst_prefix <ipv6addr> dst_prefix_length <int 1-128> | 
src_layer4_port [domain | echo | ftp | ftpdata | http | smtp | snmp | telnet | tftp | other <int 0-
65535>] | dst_layer4_port [domain | echo | ftp | ftpdata | http | smtp | snmp | telnet | tftp | other 
<int 0-65535>] | protocol [ip | icmp | igmp | tcp | udp | other <int 1-255>] | ip_dscp [af11 | af12 | 
af13 | af21 | af22 | af23 | af31 | af32 | af33 | af41 | af42 | af43 | be | cs0 | cs1 | cs2 | cs3 | cs4 | 
cs5 | cs6 | cs7 | ef | other <int 0-63>] | flow_label <uint 0-1048575>}] | del_rule <value 1-10> | 
edit_rule <value 1-10> [type [deny | permit] | match_every [true | false] | src_prefix <ipv6addr> 
src_prefix_length <int 1-128> | src_layer4_port [domain | echo | ftp | ftpdata | http | smtp | 
snmp | telnet | tftp | other <int 0-65535>] | dst_prefix <ipv6addr> dst_prefix_length <int 1-128> 
| dst_layer4_port [domain | echo | ftp | ftpdata | http | smtp | snmp | telnet | tftp | other <int 0-
65535>] | protocol [ip | icmp | igmp | tcp | udp | other <int 1-255> ] | ip_dscp [af11 | af12 | af13 
| af21 | af22 | af23 | af31 | af32 | af33 | af41 | af42 | af43 | be | cs0 | cs1 | cs2 | cs3 | cs4 | cs5 | 

Summary of Contents for DWS-3160-24TC
























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DWS-3160-24TC

Cabletron Systems SmartCell 6A000 User Manual preview
SmartCell 6A000
Brand: Cabletron Systems Pages: 114
Cabletron Systems MRX Installation Manual preview
MRX
Brand: Cabletron Systems Pages: 62
Cabletron Systems CyberSWITCH CSX150 Quick Start Manual preview
CyberSWITCH CSX150
Brand: Cabletron Systems Pages: 49
Cabletron Systems Cabletron CyberSWITCH CSX5500 User Manual preview
Cabletron CyberSWITCH CSX5500
Brand: Cabletron Systems Pages: 729
Panduit ATLONA Omega AT-OME-MS52W Manual preview
ATLONA Omega AT-OME-MS52W
Brand: Panduit Pages: 123
Panduit Atlona AT-OME-MS42 Manual preview
Atlona AT-OME-MS42
Brand: Panduit Pages: 86
Dataprobe iBoot-G2 Instructions Manual preview
iBoot-G2
Brand: Dataprobe Pages: 21
Zektor HDA604 User Manual preview
HDA604
Brand: Zektor Pages: 84
Dahua PFS3005-5ET-V2 Quick Start Manual preview
PFS3005-5ET-V2
Brand: Dahua Pages: 17
Campbell HUB-SDM5 Instruction Manual preview
HUB-SDM5
Brand: Campbell Pages: 10
XtendLan MATRIX1608A User Manual preview
MATRIX1608A
Brand: XtendLan Pages: 24
Cabletron Systems SmartSTACK 100 ELS100-16TX Getting Started preview
SmartSTACK 100 ELS100-16TX
Brand: Cabletron Systems Pages: 16
Televes 719601 User Manual preview
719601
Brand: Televes Pages: 24
UNIARCH SW-2106-P User Manual preview
SW-2106-P
Brand: UNIARCH Pages: 6
Tripp Lite B022-004-R Specification preview
B022-004-R
Brand: Tripp Lite Pages: 3
Sensor Switch SPODMRA JOT Installation Instructions preview
SPODMRA JOT
Brand: Sensor Switch Pages: 2
Mellanox Technologies Grid Director 4700 Installation Manual preview
Grid Director 4700
Brand: Mellanox Technologies Pages: 88
StarTech.com ICUSB23216FD Quick Start Manual preview
ICUSB23216FD
Brand: StarTech.com Pages: 12

Brands by name

Popular brands

Load more brands