DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
844
match_all
- Specifies the 'match all' class type and indicates that all of the individual match
conditions must be true for a packet to be considered a member of the class.
ipv4
- (Optional) Specifies that the Layer 3 protocol used, for this class, is IPv4. This is the
default option.
ipv6
- (Optional) Specifies that the Layer 3 protocol used, for this class, is IPv6.
Restrictions
Only Administrators can issue this command.
Example
To create a DiffServ class:
DWS-3160-24PC:admin#create wireless diffserv class_map cm1 match_all
Command: create wireless diffserv class_map cm1 match_all
Success.
DWS-3160-24PC:admin#create wireless diffserv class_map cm2 match_all ipv4
Command: create wireless diffserv class_map cm2 match_all ipv4
Success.
DWS-3160-24PC:admin#create wireless diffserv class_map cm3 match_all ipv6
Command: create wireless diffserv class_map cm3 match_all ipv6
Success.
DWS-3160-24PC:admin#
92-9
delete wireless diffserv class_map
Description
This command is used to delete an existing wireless DiffServ class.
Format
delete wireless diffserv class_map <name 1-31>
Parameters
<name 1-31>
- Enter the class map name used here. This name can be up to 31 characters long.
This name is a case sensitive alphanumeric string that uniquely identifies a DiffServ class. The
class map name “default” is reserved and must not be used.
Restrictions
Only Administrators can issue this command.
Example
To delete an existing wireless Diffserv class used without any match condition:
