DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
894
list.
AP Provisioning Database Age Time (hours)
- Displays the value that determines how long to
keep an entry in the AP Provisioning Database. After an AP is inactive for the number of hours
you specify in this field, its entry is removed from the database. Range is 0 to 240. If set to 0,
entries are not aged-out and remain in the database forever.
Restrictions
None.
Example
To display information of the configured age times for the status database entries:
DWS-3160-24PC:admin#show wireless agetime
Command: show wireless agetime
Ad Hoc Client Status Age (hours) : 20
AP Failure Status Age (hours) : 0
RF Scan Status Age (hours) : 24
Detected Clients Age (hours) : 24
AP Provisioning Database Age Time (hours) : 72
DWS-3160-24PC:admin#
95-33
show wireless ap_capability
Description
This command is used to display AP hardware, image, and dual boot support capabilities.
Format
show wireless ap_capability {[[any | hw_dwl8600 | hw_dwl3600 | hw_dwl6600] radio <int 1-
2> | image_table | dual_boot]}
Parameters
any
- (Optional) Specifies that a summary of access point hardware type capabilities for all
supported AP hardware types is displayed.
hw_dwl8600
- Specifies that detailed hardware type capabilities will be displayed for the
DWL-8600.
hw_dwl3600
- Specifies that detailed hardware type capabilities will be displayed for the
DWL-3600.
hw_dwl6600
- Specifies that detailed hardware type capabilities will be displayed for the
DWL-6600.
radio
- (Optional) Specifies the radio index on the AP hardware type. If the selected hardware
only supports one radio, Radio 2 displays a message indicating that the radio is invalid for the
selected hardware type.
<int 1-2
> - Enter the radio index value used here. This value must be between 1 and 2.
image_table
- (Optional) Specifies that the AP image capability table will be displayed.
dual_boot
- (Optional) Specifies that the AP dual boot support table will be displayed.
Restrictions
None.
