DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
97
Forbidden Router Port
This section is used to designate a range of ports as being not connected to
multicast-enabled routers. This ensures that the forbidden router port will not
propagate routing packets out.
Dynamic Router Port
Display router ports that have been dynamically configured.
Ports
Select the appropriate ports individually to include them in the Router Port
configuration.
Click the
Select All
button to select all the ports for configuration.
Click the
Clear All
button to unselect all the ports for configuration.
Click the
Apply
button to accept the changes made.
Click the
<<Back
button to discard the changes made and return to the previous window.
MLD Snooping Rate Limit Settings
Users can configure the rate limit of the MLD control packet that the switch can process on a specific port or VLAN
in this page.
To view the following window, click
L2 Features > L2 Multicast Control > MLD Snooping > MLD Snooping Rate
Limit Settings
, as show below:
Figure 7-57 MLD Snooping Rate Limit Settings window
The fields that can be configured are described below:
Parameter
Description
Port List
Enter the Port List here.
VID List
Enter the VID List value here.
Rate Limit (1-1000)
Configure the rate limit of MLD control packet that the switch can process on a
specific port/VLAN. The rate is specified in packet per second. The packet that
exceeds the limited rate will be dropped. Tick the
No Limit
check box to lift the rate
limit requirement.
Click the
Apply
button to accept the changes made for each individual section.
Click the
Find
button to locate a specific entry based on the information entered.
Click the
Edit
button to re-configure the specific entry.
MLD Snooping Static Group Settings
This page used to configure the MLD snooping multicast group static members.
To view the following window, click
L2 Features > L2 Multicast Control > MLD Snooping > MLD Snooping
Static Group Settings
, as show below:
