DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
125
Port
Use the drop-down menu to select a port.
Click the
Find
button to locate a specific entry based on the information entered.
To view the normal LLDP Remote Port information page per port, click the
Show Normal
button.
After clicking the
Show Normal
button, the following page will appear:
Figure 7-100 LLDP Remote Port Information – Show Normal window
Click the
<<Back
button to return to the previous window.
NLB FDB Settings
The Switch supports Network Load Balancing (NLB). This is a MAC forwarding control for supporting the Microsoft
server load balancing application where multiple servers can share the same IP address and MAC address. The
requests from clients will be forwarded to all servers, but will only be processed by one of them. In multicast mode,
the client uses a multicast MAC address as the destination MAC to reach the server. Regardless of the mode, the
destination MAC is the shared MAC. The server uses its own MAC address (rather than the shared MAC) as the
source MAC address of the reply packet. The NLB multicast FDB entry will be mutually exclusive with the L2
multicast entry.
To view this window, click
L2 Features > NLB FDB Settings
, as shown below.
Figure 7-101 NLB FDB Settings window
The fields that can be configured are described below:
Parameter
Description
VLAN Name
Click the radio button and enter the VLAN of the NLB multicast FDB entry to be
created.
VID (1-4094)
Click the radio button and enter the VLAN by the VLAN ID.
MAC Address
Enter the MAC address of the NLB multicast FDB entry to be created.
Ports
Click the ports to be configured. Click the
All
button to select all ports.
Click the
Apply
button to accept the changes made.
Click the
Clear All
button to remove all the entered information in the fields.
Click the
Edit
button to update the information of the corresponding entry.
Click the
Delete
button to delete the corresponding entry.
