DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
19
Weekdays
Use the check boxes to select the corresponding days of the week that this time range is to
be enabled. Tick the Select All Days check box to configure this time range for every day of
the week.
Click the
Apply
button to accept the changes made. Current configured entries will be displayed in the
Time
Range Information
table in the bottom half of the window shown above.
Port Group Settings
This window is used to create port groups, and add or delete ports from the port groups.
To view the following window, click
System
Configuration > Port Group Settings
, as show below:
Figure 5-17 Port Group Settings window
The fields that can be configured are described below:
Parameter
Description
Group Name
Enter the name of a port group.
Group ID (1-64)
Enter the ID of a port group
Port List
Enter a port or list of ports. Tick the
All
check box to apply to all ports.
Action
Use the drop-down menu to select
Create Port Group
,
Add Ports
or
Delete Ports
.
Click the
Apply
button to accept the changes made.
Click the
Delete
button to remove the specific entry.
Time Settings
Users can configure the time settings for the Switch.
To view the following window, click
System
Configuration > Time Settings
, as show below:
Figure 5-18 Time Settings window
The fields that can be configured are described below:
Parameter
Description
Date (DD/MM/YYYY)
Enter the current day, month, and year to update the system clock.
Time (HH:MM:SS)
Enter the current time in hours, minutes, and seconds.
Click the
Apply
button to accept the changes made.
