DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
270
This option decides whether the DHCP Relay will process the DHCP option 60 or not
To view this window, click
Network Application > DHCP > DHCP Relay > DHCP Relay Option 60 Settings
as
shown below:
Figure 12-6 DHCP Relay Option 60 Settings window
The fields that can be configured are described below:
Parameter
Description
String
Enter the DHCP Relay Option 60 String value. Different strings can be specified for the
same relay server, and the same string can be specified with multiple relay servers.
The system will relay the packet to all the matching servers.
Server IP Address
Here the user can enter the DHCP Relay Option 60 Server IP address.
Match Type
Here the user can enter the DHCP Relay Option 60 Match Type value.
Exact Match
– The option 60 string in the packet must full match with the specified
string.
Partial Match
– The option 60 string in the packet only need partial match with the
specified string.
IP Address
Enter the DHCP Relay Option 60 IP address.
String
Enter the DHCP Relay Option 60 String value.
Click the
Add
button to add a new entry based on the information entered.
Click the
Find
button to locate a specific entry based on the information entered.
Click the
Delete
button to remove the specific entry based on the information entered.
Click the
Show All
button to display all the existing entries.
Click the
Delete All
button to remove all the entries listed.
DHCP Relay Option 61 Settings
This window is used to configure, add and delete DHCP relay option 61 parameters.
To view this window, click
Network Application > DHCP > DHCP Relay > DHCP Relay Option 61 Settings
as
shown below:
