DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
426
L3 Tunnel Mask
Enter the subnet mask for the network IP address on the L3 Tunnel subnet.
RADIUS Use Network
Configuration
This parameter is used to control whether the VAP uses the network or global
RAIDUS Accounting settings. Select
Enable
to use RADIUS accounting settings
defined on the Wireless Network Configuration page. Select
Disable
to use
RADIUS accounting settings defined on the Wireless Global Configuration page.
RAIDUS Accounting
Tick the check box to enable RADIUS accounting for wireless clients.
Security Option
Select the security mechanism of the wireless connection to protect the network.
None
Select this for not having any security of the network, and no further
options are configurable on the AP.
WEP
Wired Equivalent Privacy (WEP) is a data encryption protocol for
802.11 wireless networks. If this security mechanism is selected, all
wireless clients and access points on the network are configured
with a 64-bit or 128-bit Shared Key for data encryption. Select
WEP
to see the following options.
Static WEP
– Select
Static WEP
to configure the static key
management. The following options will display:
•
Authentication
– Tick the check boxes to select the
authentication type. Available options are
Open System
and
Shared Key
.
•
WEP Key Type
– Click the radio buttons to select the key
type. Available options are
ASCII
and
HEX
. ASCII key
includes upper and lower case alphabetic letters, the
numeric digits, and special symbols such as @ and #. HEX
key includes digits 0 to 9 and the letters A to F.
•
WEP Key Length (bits)
– Click the radio button to select
the key length in
64
bits or
128
bits.
•
WEP Keys
– Click the radio button to select the specific
transfer key. Enter up to 4 WEP keys in the text fields. The
length of keys depends on the
WEP Key Type
and
WEP
Key Length
configured earlier.
WEP IEEE802.1X
– Select
WEP IEEE802.1X
to see the following
options:
•
Bcast Key Refresh Rate
– Enter a value to set the interval
at which the broadcast key is changed for clients associated
to this VAP.
•
Session Key Refresh Rate
– Enter a value to set the
interval at which the Unicast session keys is changed.
