DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
455
Figure 4-25 Policy Class Definition window
The fields that can be configured are described below:
Parameter
Description
Policy Selector
Select a policy to be configured.
Click the
Configuration Attribute
to configure the specific policy.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
After clicking the
Configure Attribute
button, the following page appears:
Figure 4-26 Policy Class Definition window
The fields that can be configured are described below:
Parameter
Description
Member Class List
Select the member class to associate with this policy.
Policy Attribute
Selector
Use the drop-down menu to select attributes supported for this type of policy. Click
the
Configure Selected Attribute
button to see the attribute configuration for that
policy.
Drop
– Select this to drop packets for this policy-class.
Mark CoS
– Select this to enter the specified Class of Service queue number to
mark all packets for the associated traffic stream with the specified class of service
value in the priority field of the 802.1p header in the next window.
Mark IP DSCP
– Select this to choose the DSCP Keyword in the next window. This
will mark all packets for the associated traffic stream with the selected IP DSCP
value.
Mark IP Precedence
– Select this to enter
IP Precedence Value
in the next
window. This will mark all packets for the associated traffic stream with the entered
IP Precedence value.
Police Simple
– Select this to establish the traffic policing style for the specified
class in the next window.
•
Committed Rate (bps)
– Enter the committed rate for monitoring the
arrival rate of incoming packets for this class.
•
Committed Burst Size (KB)
– Enter the committed burst size to determine
the amount of conforming traffic allowed.
•
Conform Action Selector
– Select an action when a packet is considered
conforming.
Drop
– The packets are immediately dropped.
