DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
145
Chapter 6
ACL
ACL Configuration Wizard
Access Profile List
CPU Access Profile List
ACL Finder
ACL Flow Meter
Egress Access Profile List
Egress ACL Flow Meter
ACL Configuration Wizard
The ACL Configuration Wizard will aid the user in the creation of access profiles and ACL Rules automatically by
simply inputting the address or service type and the action needed. It saves administrators a lot of time.
To view this window, click
ACL > ACL Configuration Wizard
as shown below:
Figure 10-1 ACL Configuration Wizard window
The fields that can be configured are described below:
Parameter
Description
Type
Use the drop-down menu to select the general ACL Rule types:
Normal
– Selecting this option will create a Normal ACL Rule.
CPU
– Selecting this option will create a CPU ACL Rule.
Egress
- Selecting this option will create an Egress ACL Rule.
Profile Name
After selecting to configure a
Normal
type rule, the user can enter the Profile Name for
the new rule here.
Profile ID (1-6)
Enter the Profile ID for the new rule.
Access ID (1-256)
Enter the Access ID for the new rule. Tick the
Auto Assign
check box to allow the
Switch automatically assigning an unused access ID to this rule.
From / To
This rule can be created to apply to four different categories:
Any
– Selecting this option will include any starting category to this rule.
MAC Address
– Selecting this option will allow the user to enter a range of MAC
addresses for this rule.
IPv4 Address
– Selecting this option will allow the user to enter a range of IPv4
addresses for this rule.
