background image

Configuring IP Information

Configuring Domain Name Servers

Page 146 

Defining DNS Host Mapping

The 

DNS Host Mapping Page

 

provides information for defining DNS Host Mapping. To define DNS host map-

ping:

1.

Click 

Basic Setup > IP Configuration > Domain Name System > Host Mapping

. The 

DNS Host 

Mapping Page

 opens:

Figure 92: DNS Host Mapping Page

The 

DNS Host Mapping Page

 contains the following fields: 

Host Names 

— Displays a user-defined default domain name. When defined, the default domain name is 

applied to all unqualified host names. The 

Host Name

 field can contain up to 158 characters. 

IP Address 

— Displays the DNS host IP address.

Remove 

— Removes default domain names. The possible field values are: 

Checked 

— Removes the selected DNS host. 

Unchecked 

— Maintains the current DNS host mapping list. 

2.

Click . 

The 

Add DNS Host Page

 opens: 

Summary of Contents for DXS-3250 - xStack Switch - Stackable
























































































































































































































































































































Reviews: