DXS-3326GSR Stackable Gigabit Layer 3 Switch
3
C
OMMAND
S
YNTAX
The following symbols are used to describe how command entries are made and values and arguments are specified in this
manual. The online help contained in the CLI and available through the console interface uses the same syntax.
Note
: All commands are case-sensitive. Be sure to disable Caps Lock or
any other unwanted function that changes text case.
<angle brackets>
Purpose
Encloses a variable or value that must be specified.
Syntax
create ipif <ipif_name> vlan <vlan_name 32> ipaddress
<network_address>
Description
In the above syntax example, you must supply an IP interface
name in the <ipif_name> space, a VLAN name in the
<vlan_name 32> space, and the network address in the
<network_address> space. Do not type the angle brackets.
Example Command
create ipif Engineering vlan Design ipaddress
10.24.22.5/255.0.0.0
[square brackets]
Purpose
Encloses a required value or set of required arguments. One
value or argument can be specified.
Syntax
create account [admin | user]
Description
In the above syntax example, you must specify either an
admin
or a
user
level account to be created. Do not type the square
brackets.
Example Command
create account admin
| vertical bar
Purpose
Separates two or more mutually exclusive items in a list, one of
which must be entered.
Syntax
show snmp [community | detail]
Description
In the above syntax example, you must specify either
community,
or
detail
. Do not type the backslash.
Example Command
show snmp community
9
