DXS-3326GSR Stackable Gigabit Layer 3 Switch
Usage Example:
To configure PIM settings for IP interface “System”:
DXS-3326GSR:4#config pim ipif System hello 35 jp_interval 70 state
enable
Command: config pim ipif System hello 35 jp_interval 70 state enable
Success.
DXS-3326GSR:4#
enable pim
Purpose
Used to enable PIM function on the Switch.
Syntax
enable pim
Description
This command will enable PIM for the Switch. PIM settings must first
be configured for specific IP interfaces using the
config pim
command.
Parameters None.
Restrictions Only
administrator-level users can use this command.
Usage Example:
To enable PIM as previously configured on the Switch:
DXS-3326GSR:4#enable pim
Command: enable pim
Success.
DXS-3326GSR:4#
disable pim
Purpose
Used to disable PIM function on the Switch.
Syntax
disable pim
Description
This command will disable PIM for the Switch. Any previously
configured PIM settings will remain unchanged and may be enabled
at a later time with the
enable pim
command.
Parameters None.
Restrictions Only
administrator-level users can use this command.
Usage Example:
304