DXS-3326GSR Stackable Gigabit Layer 3 Switch
44
C
OMMAND
H
ISTORY
L
IST
The command history list commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in
the following table.
Command Parameters
?
show command_history
config command_history <value 1-40>
Each command is listed, in detail, in the following sections.
?
Purpose
Used to display all commands in the Command Line Interface
(CLI).
Syntax
?
Description
This command will display all of the commands available
through the Command Line Interface (CLI).
Restrictions None.
Parameters None.
Example usage
To display all of the commands in the CLI:
DXS-3326GSR:4#?
?
config account
..
clear
clear arptable
clear counters
clear fdb
clear log
config 802.1p default_priority
config 802.1p user_priority
config 802.1x auth_mode
config 802.1x auth_parameter ports
config 802.1x auth_protocol
config 802.1x capability ports
config 802.1x init
config 802.1x reauth
config access profile profile_id
config admin local_enable
config all_boxes_id
config arp_aging time
config authen_application
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
342
