DXS-3326GSR Stackable Gigabit Layer 3 Switch
1:3 Disabled 1 DeleteOnReset
1:4 Disabled 1 DeleteOnReset
1:5 Disabled 1 DeleteOnReset
1:6 Disabled 1 DeleteOnReset
1:7 Enabled 10 DeleteOnReset
1:8 Disabled 1 DeleteOnReset
1:9 Disabled 1 DeleteOnReset
1:10 Disabled 1 DeleteOnReset
1:11 Disabled 1 DeleteOnReset
1:12 Disabled 1 DeleteOnReset
1:13 Disabled 1 DeleteOnReset
1:14 Disabled 1 DeleteOnReset
1:15 Disabled 1 DeleteOnReset
1:16 Disabled 1 DeleteOnReset
1:17 Disabled 1 DeleteOnReset
1:18 Disabled 1 DeleteOnReset
1:19 Disabled 1 DeleteOnReset
DXS-3326GSR:4#
delete port_security_entry_vlan_name
Purpose
Used to delete an entry from the Switch’s port security settings.
Syntax delete
port_security_entry_vlan_name <vlan_name 32> port
<port> mac_address <macaddr>
Description
This command is used to remove an entry from the port security
entries learned by the Switch and entered into the forwarding
database.
Parameters
<vlan_name 32>
- Enter the corresponding VLAN of the entry the
user wishes to delete.
port <port>
- Enter the corresponding port of the entry to delete. The
port list is specified by listing the lowest switch number and the
beginning port number on that switch, separated by a colon. Then
the highest switch number, and the highest port number of the range
(also separated by a colon) are specified. The beginning and end of
the port list range are separated by a dash. For example, 1:3
specifies switch number 1, port 3. 2:4 specifies switch number 2,
port 4. This command can only support one port to be configured at
a time. Multiple port entries require the user to repeat the command
for separate ports.
mac_address <macaddr>
- Enter the corresponding MAC address of
the entry the user wishes to delete.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To delete an entry from the port security list:
31
