DXS-3326GSR Stackable Gigabit Layer 3 Switch
Reply from 10.48.74.121, time<10ms
Ping statistics for 10.48.74.121
Packets: Sent =4, Received =4, Lost =0
DXS-3326GSR:4#
traceroute
Purpose
Used to trace the routed path between the Switch and a destination
endstation.
Syntax
<ipaddr> {ttl <value 1-60> | port <value 30000-64900> | timeout
<sec 1-65535> | probe <value <1-9>
Description
The traceroute command allows you to trace a route between the
Switch and a give host on the network.
Parameters
<ipaddr>
- Specifies the IP address of the host.
ttl <value 1-60>
- The time to live value of the trace route request.
This is the maximum number of routers the traceroute command will
cross while seeking the network path between two devices.
port <value 30000-64900> -
The port number. The value range is
from 30000 to 64900 .
timeout <sec 1-65535>
- Defines the time-out period while waiting
for a response from the remote device. The user may choose an
entry between 1 and 65535 seconds.
probe <value 1-9>
- The probe value is the number of times the
Switch will send probe packets to the next hop on the intended
traceroute path. The default is 1.
Restrictions None.
Example usage:
To trace the routed path between the Switch and 10.48.74.121.
DXS-3326GSR:4#traceroute 10.48.74.121 probe 3
Command: traceroute 10.48.74.121
probe 3
1 <10ms 10.254.254.251
2 <10ms 10.55.25.35
3 <10ms 10.22.35.1
DXS-3326GSR:4#
61
