DXS-3326GSR Stackable Gigabit Layer 3 Switch
DXS-3326GSR:4#show stp ports 1:1-1:9
Command: show stp ports 1:1-1:9
MSTP Port Information
----------------------
Port Index : 1:1 , Hello Time: 2 /2 , Port STP enabled
External PathCost : Auto/200000 , Edge Port : No /No , P2P : Auto /Yes
Msti Designated Bridge Internal PathCost Prio Status Role
----- ------------------ ----------------- ---- ---------- ----------
0 8000/0050BA7120D6 200000 128 Forwarding Root
1 8001/0053131A3324 200000 128 Forwarding Master
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
show stp instance_id
Purpose
Used to display the Switch’s STP instance configuration
Syntax
show stp instance_id <value 0-15>
Description
This command displays the Switch’s current STP Instance
Settings and the STP Instance Operational Status.
Parameters
<value 0-15>
- Enter a value defining the previously configured
instance_id
on the Switch. An entry of
0
will display the STP
configuration for the CIST internally set on the Switch.
Restrictions None
Example usage:
To display the STP instance configuration for instance 0 (the internal CIST) on the Switch:
DXS-3326GSR:4#show stp instance 0
Command: show stp instance 0
STP Instance Settings
---------------------------
Instance Type : CIST
Instance Status : Enabled
Instance Priority : 32768(bridge priority : 32768, sys ID ext : 0 )
STP Instance Operational Status
--------------------------------
Designated Root Bridge : 32766/00-90-27-39-78-E2
90
