DXS-3410 Series
Layer 3 Stackable Managed Switch
Hardware Installation Guide
5
Rear Panel Components
The rear panel features components like an AC power socket, a security lock, an electrical ground point, and more.
Figure 2-5 DXS-3410-32XY Rear Panel
Figure 2-6 DXS-3410-32SY Rear Panel
This following table lists the rear panel components on the Switch:
Port
Description
Security Lock
The security lock, compatible with Kensington standards, enables connection of
the Switch to a secure and immovable device. Insert the lock into the notch and
turn the key to secure it. The lock-and-cable set should be acquired separately.
Redundant Power Supply
The RPS port can be utilized to connect an optional external load-sharing RPS to
the Switch. In the event of internal power failure, the external RPS will promptly
and automatically provide power to the Switch.
Switch GND
Utilize an electrical grounding wire to connect one end to the Switch GND and the
other end to an electrical grounding point, typically located on the mounting rack of
the Switch itself.
AC Power Connector
The AC power cord (included in the package) can be inserted into this receptacle
to provide the Switch with 100-240 VAC power at 50-60 Hz.
Power Cord Retainer Hole
The power cord retainer hole is designed for inserting the power cord retainer,
which secures the AC power cord in place.
Summary of Contents for DXS-3410 Series
Page 1: ...Version 1 00 2023 12 18...
Page 54: ......
