3
Setting up your DP-30P+ for network
printing in Windows XP
The factory default IP address of the DP-301P+ is 192.168.0.10. In order to
connect to the printer through the DP-301P+, the DP-301P+ must have the
same IP network settings as your network. IP address can be assigned manually
or automatically by DHCP, BOOTP or RARP. To access the print server’s web
configuration, manually assign an IP address on one of the PC’s on your network
to the same subnet as the print server.
For additional Windows operating system setup or information
on the web-management interface, refer to the manual located
on the CD-ROM.
For Mac OS printing, please refer to the
manual located on the CD-ROM
.
Go to
Start
>
right click
on
My Network Places
>
select
Properties
>
Double-click
on
the
Network Connection
associated
with your Network Adapte
r
.
Input a static IP address in the
same range as the print server.
Click
OK
Click
Internet Protocol (TCP/IP)
Click
Properties
Select
Use the following IP address
IP address:
92.68.0.52
Subnet mask:
255.255.255.0
Summary of Contents for Epress EtherNetwork DP-301P+
Page 12: ...12 ...
