background image

2

WLAN 22Mbps MiniPCI Card

1.

 

Product General Information

1.1. Product Description

GL2422MP, the wireless Ethernet adapter for mini PCI type IIIB compliant

notebook PCs, set-top box and integrated device, is fully compatible with

IEEE 802.11b standard and supporting higher data rate to 22Mbps. Using

Direct Sequence spread spectrum technology for immunity from interference,

it will automatically fallback to lower data rate in the environment of

interference.

22Mbps data rate is designed by the Packet Binary Convolution Code (PBCC) modulation technique. The software supports

Windows OS such as Win98, Win2000, Win ME, and Win XP. The Mini PCI card for any integrated device is designed with U.FL

or MMCX connector to conduce high performance for integrated product.

1.2. Product Feature

 

IEEE 802.11b Direct Sequence high rate compatible.

 

Based on DSSS Technology and support the modulation of PBCC mode

 

High-Speed wireless connection up to 22Mbps data rate, and support 11/5.5/2/1 Mbps 802.11b standard

 

Advanced Power Management supports power saving mode for battery device

 

Auto fallback data rate in the environment of interference.

 

64/128/256 Bits WEP Encryption function

 

High through-put supports multi-Media data bandwidth requirement

 

Plug-and-play Installation

 

Support Mini PCI type IIIB interface

1.3. Product Application

 

Wireless Networking in Enterprise, SOHO and home environment

 

Wireless Networking Access in Hot Spot area such as Airport, Hotel, School, Convention center, Coffee shop, etc…

 

Mobile media through wireless LAN

 

Mobile networking for notebook PC, and mobile devices

 

Build system in Ad-Hoc for Host-Client appliance or Infrastructure mode for multi-access

Summary of Contents for GL2422MP
















Reviews: