Contents
4 Screws
Wiring Labels
5 Wire Nuts
Komfy Switch
Faceplate
Komfy Switch Cover
with 2 Click Pads
by D-Link
Please read all the instructions before you begin installation. The Komfy
Switch is designed for installation in standard electrical boxes and to be
installed in accordance with National Fire Protection Association
(NFPA 70). If you are not sure about any part of the instructions, consult
a qualified electrician to perform the installation.
1. Not compatible with 3-way (multi-location control) switches.
2. Requires neutral wire (refer to Step 2).
Verify Switch Compatibility
Verify Wi-Fi Signal Strength
Hold your iPhone close to the switch you are replacing. Make sure
you have a good Wi-Fi signal there.
WARNING! Potential Shock Hazard
Quick Installation Guide
Komfy Switch
by D-Link
